C7 On-highway Engine Caterpillar


Air Compressor

Usage:

C7 KAL



Illustration 1g01156966

Left Side View




Illustration 2g01156969

View A-A

(1) Air compressor

(2) Nut

Use the following procedure to mount the air compressor.

  1. Install two bolts (A) and tighten the bolts to the standard torque.

  1. Install the four bolts (B) finger tight.

  1. Tighten four bolts (B) to the standard torque.

Caterpillar Information System:

3406E, C-10 and C-12 On-highway Engines Eaton Top 2 Transmission Circuit - Test
2004/06/01 Correction to the Operation and Maintenance Manual, SEBU7641-01 {1102}
Product Link - PL102C Configuration
C7 On-highway Engine Cylinder Block Cover Group
Product Link - PL102C System Schematic
G3500 Engines Engine Operation
3456 Engine, 836G Landfill Compactor, 834G Wheel Dozer and 988G Wheel Loader Low Power/Poor or No Response to Throttle
3126B Petroleum Engine Engine Speed/Timing Sensor Circuit - Test
2004/05/01 A New Type of Main Bearing Is Now Used {1202, 1203}
2013/03/01 A New Type of Main Bearing is Now Used {1203}
3406E and 3456 Generator Set Engines Can Not Reach Top Engine RPM
2004/05/03 A New Type of Main Bearing is Available {1202, 1203}
Product Link - PL102C Diagnostic Capabilities
C18 Marine Generator Set Aftercooler Condensate Drain Valve - Inspect/Clean
C7 Engines for Caterpillar Built Machines Vibration Damper
3126B Engine for Caterpillar Built Machines Connecting Rod
C27 and C32 Industrial and Petroleum Engines Fuel Transfer Pump
C15 Petroleum Engines Alternator - Remove and Install
3406E and 3456 Generator Set Engines E271 User Defined Switch Active
3500B Marine Propulsion Engines Engine Valve Lash - Inspect/Adjust
C7 Petroleum Engines Finding Top Center Position for No. 1 Piston
Product Link - PL102C Electronic Service Tool Does Not Communicate with ECM
C27 and C32 Engines for Caterpillar Built Machines Fuel Filter Base
Electrical System for All Caterpillar Products Basic Circuit Theory
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.