- Wheel Loader:
- 994 (S/N: 9YF1-UP)
- 994D (S/N: 3TZ1-UP)
Introduction
This Special Instruction lists the dimensions for the front hitch and the rear hitch for the 994 Wheel Loader and the 994D Wheel Loader. This Special Instruction may be referred to for reconditioning and rebuilding. Repair is encouraged in order to reduce replacement costs. Each hitch should be evaluated in order to determine the need for repair or replacement. All dimensions that are listed are dimensions that are used for manufacturing and assembling a new machine.
In most cases, dimension (S) is the distance between the items. Dimension (T) is the thickness of the item and dimension (D) is the diameter of the item.
Reference: Part numbers and servicing information can be found in the Parts Manual and Service Manual for your machine.
Frame Assembly
Illustration 1 | g01061131 |
Loader frame |
Frame Assembly
Illustration 2 | g01061129 |
Engine end frame |
Dimensions
Dimension Chart     | |
Location     | 994 Dimension     |
S1     | 300.0 ± 0.5 mm (11.81 ± 0.02 inch)     |
S2     | 109.22 ± 1.00 mm (4.300 ± 0.039 inch)     |
T3     | 280.00 ± 0.25 mm (11.024 ± 0.010 inch)     |
S4     | 320 ± 5.0 mm (12.6 ± 0.20 inch)     |
S5     | 210.0 ± 5.0 mm (8.27 ± 0.20 inch)     |
T6     | 120.00 ± 0.25 mm (4.724 ± 0.010 inch)     |
T7     | 110 ± 0.25 mm (4.3 ± 0.010 inch)     |
S7     | 116 ± 2 mm (4.6 ± 0.1 inch)     |
S8 (1)     | 550.00 ± 0.25 mm (21.654 ± 0.010 inch)     |
D1     | 240.00 ± 0.05 mm (9.449 ± 0.002 inch)     |
D2     | 174.60 ± 0.05 mm (6.874 ± 0.002 inch)     |
D3     | 120.65 ± 0.04 mm (4.750 ± 0.002 inch)     |
D4     | 317.513 ± 0.038 mm (12.5005 ± 0.0015 inch)     |
D5     | 211.00 ± 0.05 mm (8.307 ± 0.002 inch)     |
D6     | 177.80 ± 0.05 mm (7.000 ± 0.002 inch)     |
D7     | 247.625 ± 0.038 mm (9.7490 ± 0.0015 inch)     |
D8     | 120.650 ± 0.038 mm (4.7500 ± 0.0015 inch)     |
D9     | 209.63 ± 0.05 mm (8.253 ± 0.002 inch)     |
D10     | 228.725 ± 0.050 mm (9.0049 ± 0.0020 inch)     |
D11     | 211.00 ± 0.05 mm (8.307 ± 0.002 inch)     |
( 1 ) | Distance between bottom of top and bottom of lower plate |