Pump Drive - Remove
Start By:
- Remove the fuel transfer pump. Refer to Disassembly and Assembly, "Fuel Transfer Pump - Remove".
Show/hide table
NOTICE |
---|
Keep all parts clean from contaminants. Contaminants may cause rapid wear and shortened component life. |
- Remove bolts (5) and cover (4). Remove the O-ring seal from cover (4).
- Remove bolts (2) and nut (1).
- Use a soft hammer to remove adapter group (3) and the pump drive out of the front housing. Remove the O-ring seal from adapter group (3).
Show/hide table
Illustration 1 | g01021037 |
Caterpillar Information System:
C15 On-highway Engine Pump Drive - Install
C15 On-highway Engine Pump Drive - Disassemble
C15 On-highway Engine Pump Drive - Assemble
G3520C and G3520E Engines Engine Mount
C11 and C13 Engines Water Pump - Remove
C7 On-highway Engines Turbocharger - Inspect
2003/07/21 A New Oversized Oil Pump Idler Gear Shaft is Available for 3054, 3054B, 3056 and 3056E Engines {1234, 1304}
2003/11/01 New Unit Injector Rocker Arm Is Now Used {1123}
G3520C and G3520E Generator Set Engines Valve Cover - Remove and Install
C4.4 (Mech) Industrial Engine Electrical System
C11 and C13 Engines for Caterpillar Built Machines Fuel Transfer Pump - Install
C11 and C13 Engines for Caterpillar Built Machines Fuel Transfer Pump - Remove
C15 On-highway Engine Diverter Valve (Coolant) - Install
C15 On-highway Engine Diverter Valve (Coolant) - Remove
C7 On-highway Engine Engine Oil Level Gauge - Calibrate
C7 On-highway Engine Refill Capacities and Recommendations
C175–16 Locomotive Engine CAN Data Link
3500B Locomotive Engines Turbocharger Support
2003/07/01 Prevent Coolant Leaks Around the Precombustion Chamber {1550}
UPS 250 and UPS 300 Uninterruptible Power Supplies System Bypass Operation
C11 and C13 Engines Water Pump - Install
C15 and C18 Petroleum Generator Sets Cooling System Supplemental Coolant Additive (SCA) - Test/Add
C11 and C13 Engines Valve Mechanism Cover Base - Remove and Install
C15 and C18 Engines for Caterpillar Built Machines Camshaft Gear - Remove and Install