914G Compact Wheel Loader and IT14G Integrated Toolcarrier Transmission Electronic Control System Caterpillar


Relay (Parking Brake)

Usage:

IT14G 1WN
测试步骤 1. 检查停车制动器继电器。

  1. 挡住机器车轮,使机器无法移动。

  1. 从换档把手上断开机器线束接头。

  1. 跨接机器线束上的针 4 到针 7。 请参阅下图。

  1. 松开停车制动器

  1. 测量机器线束的针 1。

  1. 重置停车制动器。



图 1g00836278

预期结果:

测量值应指示蓄电池正极电压。

结果:

  • 是 - 测量值指示蓄电池正极电压。停止

  • 否 - 测量值不指示蓄电池正极电压。

    修复: 检查所有接头有无松动或损坏的针。 检查机器线束是否导通。

    停止

Caterpillar Information System:

416D Backhoe Loader Backhoe Stabilizer Controls
2001/10/22 Correction to Specification, System Operation, Testing and Adjusting Module , "Final Drive Reducer" {4050}
416D Backhoe Loader Lubricant Viscosities
735 Articulated Truck Power Train Center Axle - Remove
416D, 420D, 424D, 428D, 430D, 432D, 438D and 442D Backhoe Loaders Hydraulic and Steering System Bank Valve (Six)(Pilot Operated)
416D, 420D, 424D, 428D, 430D, 432D, 438D and 442D Backhoe Loaders Hydraulic and Steering System Bank Valve (Six)(Pilot Operated)
416D, 420D, 424D, 428D, 430D, 432D, 438D and 442D Backhoe Loaders Hydraulic and Steering System Bank Valve (Six)(Pilot Operated)
3408E and 3412E Engines for Caterpillar Built Machines Air Compressor Drive Gear - Install
416D, 420D, 424D, 428D, 430D, 432D, 438D and 442D Backhoe Loaders Hydraulic and Steering System Bank Valve (Six)(Mechanically Operated)
416D, 420D, 424D, 428D, 430D, 432D, 438D and 442D Backhoe Loaders Hydraulic and Steering System Bank Valve (Six)(Mechanically Operated)
950G Series II Wheel Loader, 962G Series II Wheel Loader and IT62G Series II Integrated Toolcarrier Hydraulic System Gear Motor (Hydraulic Fan)
416D, 420D, 424D, 428D, 430D, 432D, 438D and 442D Backhoe Loaders Hydraulic and Steering System Bank Valve (Six)(Mechanically Operated)
CP-433E, CS-423E and CS-433E Vibratory Compactors Machine Systems Piston Pump (Vibratory) - Disassemble
TH210 and TH215 Telehandlers Steering System Gear Pump (Hydraulic and Steering)
AS2251 Screed Forces Affecting Mat Thickness
AS2251 Screed Plate Locations and Film Locations
AS2251 Screed Specifications
3500B Engines for Caterpillar Built Power Modules Engine Coolant Temperature Sensor
725 and 730 Articulated Trucks Braking System Release Pressure for Parking Brake - Test
3408E and 3412E Engines for Caterpillar Built Machines Inlet Air Temperature Sensor - Remove and Install
AS2251 Screed Leveling
TH210 and TH215 Telehandlers Steering System Accumulator Charging Valve
AS2251 Screed Control of Screed
MT735, MT745, MT755 and MT765 Agricultural Tractors Engine Supplement Fan - Remove and Install
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.