Revision to Systems Operation, Testing and Adjusting , "Tilt Cylinder Head End Line Relief Valve" {5117, 5117}
- Load Haul Dump (LHD):
- R1700G (PIN: 8XZ)
The information in Step 8 on page 45 for the pressure setting of the head end line relief valve for the tilt cylinder has been revised. The revised information follows:
- The pressure setting of the head end line relief valve for the tilt cylinder should be 23785 ± 170 kPa (3450 ± 25 psi).
Caterpillar Information System:
725 and 730 Articulated Trucks Steering, Suspension, and Body Hoist Hydraulic Systems Piston Pump (Steering) - Test and Adjust
725, 730, 735, 740 and 740 EJECTOR Articulated Trucks Power Train Electronic Control System MID 027 - CID 0444 - FMI 05
725, 730, 735, 740 and 740 EJECTOR Articulated Trucks Power Train Electronic Control System MID 027 - CID 0444 - FMI 03
416D, 420D, 424D, 428D, 430D, 432D, 438D and 442D Backhoe Loaders Hydraulic and Steering System Bank Valve (Backhoe) (Pilot Operated)
725, 730, 735, 740 and 740 EJECTOR Articulated Trucks Power Train Electronic Control System MID 027 - CID 0420 - FMI 06
3054B Engine for Caterpillar Built Machines Engine Oil Pressure Switch
2000/11/27 A Special Instruction Is Available for an Improved Hose Routing on the Feed Roller Motors on Harvester Heads {5057}
3054B Engine for Caterpillar Built Machines Coolant Temperature Switch
HH45 Harvester Head, HH55 Harvester Head, HH65 Harvester Head and HH75 Harvester Head (CABS) Hydraulic System Color Marking System
725, 730, 735, 740 and 740 EJECTOR Articulated Trucks Power Train Electronic Control System MID 027 - CID 0420 - FMI 05
3054B Engine for Caterpillar Built Machines Cylinder Block
3054B Engine for Caterpillar Built Machines Piston Cooling Jet
416D, 420D, 424D, 428D, 430D, 432D, 438D and 442D Backhoe Loaders Engine Supplement Hydraulic System Pressure - Release
725, 730, 735, 740 and 740 EJECTOR Articulated Trucks Power Train Electronic Control System MID 027 - CID 0444 - FMI 06
2000/11/27 Revision to Systems Operation, Testing and Adjusting , "Relief Valve (Main) - Test and Adjust" {5069, 5069}
2000/11/27 Revision to Systems Operation, Testing and Adjusting , "Main Relief Valve" {5069}
416D, 420D, 424D, 428D, 430D, 432D, 438D and 442D Backhoe Loaders Engine Supplement Hydraulic System Pressure - Release
2000/11/27 Revision to Specifications , "Relief Valve (Main)" and "Relief Valve (Line)" {5069, 5117}
Installation Procedure for Improved Hose Routing on Harvester Heads{5051, 5057} Installation Procedure for Improved Hose Routing on Harvester Heads{5051, 5057}
725, 730, 735, 740 and 740 EJECTOR Articulated Trucks Power Train Electronic Control System MID 027 - CID 0562 - FMI 02
2001/03/12 The Hardware and Software for the Transmission have been Revised {3168, 7620}
2001/02/05 Improved Lift Arm Bearings are Available {6107, 6118}
2000/11/27 A New Directional Control Valve Improves the Response of the Proportional Steering on Remote Control {5412}
RM-250C Reclaimer Mixer Propel System Piston Motor (Transmission, Axle, and Final Drive)