Swing Motor
Show/hide table
 | |
| Illustration 1 | g00275313 |
Show/hide table
| NOTICE |
|---|
To avoid system damage, make sure that the hydraulic motor is properly filled with hydraulic oil before start-up. |
Crossover relief valve pressure setting ... 25500 ± 980 kPa (3700 ± 140 psi)
(1) 099-0328 Spring
- Free length ... 35.8 mm (1.41 inch)
- Outside diameter ... 16.0 mm (0.63 inch)
(2) 7I-0062 Spring
- Free length ... 21.1 mm (0.83 inch)
- Outside diameter ... 4.4 mm (0.17 inch)
(3) Torque for four bolts ... 160 ± 16 N·m (120 ± 12 lb ft)
(4) 096-5934 Spring
- Free length ... 51.7 mm (2.04 inch)
- Outside diameter ... 7.0 mm (0.28 inch)
(5) Torque for two relief valves ... 80 ± 8 N·m (60 ± 6 lb ft)
(6) Torque for two plugs ... 155 ± 16 N·m (115 ± 12 lb ft)
(7) Torque for two plugs ... 135 ± 14 N·m (100 ± 10 lb ft)
(8) 099-0330 Spring
- Free length ... 1.7 mm (0.07 inch)
- Outside diameter ... 31.8 mm (1.25 inch)
Caterpillar Information System:
3003, 3013, 3014 and 3024 Engines for Caterpillar Built Machines Housing (Front) - Install
3304B and 3306B Engines for Caterpillar Built Machines Engine Balancer Shaft Bearings - Remove and Install
3003, 3013, 3014 and 3024 Engines for Caterpillar Built Machines Housing (Front) - Remove
302.5 Mini Hydraulic Excavator Hydraulic System Relief Valve (Line)
318B Excavator Machine System Specifications Piston Pump (Main)
365B, 365B Series II, 365BL and 365BL Series II Excavators Machine Systems Main Hydraulic Pump - Disassemble
3126B Engine for Caterpillar Built Machines Main Bearing Journal
3064 and 3066 Engines for Caterpillar Built Machines Crankshaft Main Bearings - Remove
3064 and 3066 Engines for Caterpillar Built Machines Crankshaft Main Bearings - Install
3064 and 3066 Engines for Caterpillar Built Machines Crankshaft Front Seal - Install
365B and 365B Series II Excavators Supplement for 3196 Engine Air Cleaner - Remove and Install
3064 and 3066 Engines for Caterpillar Built Machines Crankshaft - Install
301.5, 301.6 and 301.8 Mini Hydraulic Excavators Hydraulic System Pilot Hydraulic System
322B, 322B L, 325B and 325B L Excavators Maintenance Interval Schedule
318B Excavator Machine System Specifications Bucket Cylinder
318B Excavator Machine System Specifications Stick Cylinder
3500B and 3500B High Displacement Generator Set Engines MID 036 - CID 0542 - FMI 02 Unfiltered Engine Oil Pressure misinstalled
3176C and 3196 Engines for Caterpillar Built Machines Fuel Temperature Sensor - If Equipped
3126B Engine for Caterpillar Built Machines Coolant Temperature Sensor
3064 and 3066 Engines for Caterpillar Built Machines Crankshaft Rear Seal - Install
365B and 365B Series II Excavators Supplement for 3196 Engine Expansion Tank - Remove and Install
365B and 365B Series II Excavators and 365B Series II Front Shovel Machine System Specifications Pilot Control Valve (Auxiliary)
3064 and 3066 Engines for Caterpillar Built Machines Crankshaft Rear Seal - Remove
3064 and 3066 Engines for Caterpillar Built Machines Cylinder Head - Install