Air Cleaner - Remove and Install
Removal Procedure
- Open the access door on the front left side of the machine.
Show/hide table
 | |
| Illustration 1 | g00101721 |
- Loosen the two cover clamps (1) and remove the air cleaner cover (2) .
Show/hide table
 | |
| Illustration 2 | g00601285 |
- Remove the primary filter element (3) and secondary filter element (5) from the air cleaner housing (4) .
Show/hide table
 | |
| Illustration 3 | g00601294 |
Show/hide table
 | |
| Illustration 4 | g00601297 |
- Remove hose clamp (6) from air cleaner housing (5) and remove air inlet hose (8). Disconnect electrical connection (7) from the air cleaner housing (5) .
Show/hide table
 | |
| Illustration 5 | g00601290 |
- Loosen clamp assembly (10). Remove two bolts and washers (9). Use two people and remove the air cleaner housing (5) from the machine. The weight of the air cleaner housing is 28 kg (61 lb).
Show/hide table
 | |
| Illustration 6 | g00601298 |
Installation Procedure
- Place the air cleaner housing (5) in position. Install two bolts and washers (9). Tighten clamp assembly (10) .
Show/hide table
| | |
| Illustration 7 | g00601298 |
- Install air inlet pipe (8) on the air cleaner housing (5). Tighten hose clamp (6). Connect electrical connection (7) to the air cleaner housing (5) .
Show/hide table
| | |
| Illustration 8 | g00601290 |
- Install the secondary filter element (5) and primary filter element (3) into the air cleaner housing (4) .
Show/hide table
| | |
| Illustration 9 | g00601297 |
Show/hide table
| | |
| Illustration 10 | g00601294 |
- Place the air cleaner cover (2) in position and tighten the two cover clamps (1) .
Show/hide table
| | |
| Illustration 11 | g00601285 |
Caterpillar Information System:
3064 and 3066 Engines for Caterpillar Built Machines Crankshaft - Install
365B, 365B Series II, 365BL and 365BL Series II Excavators Machine Systems Track Adjuster - Install
SR500 Generators General Maintenance Information
312B-5090B, M325B, W330B and W345B Series II Excavators Air Conditioning and Heating Speed Control - Test
3500B and 3500B High Displacement Generator Set Engines MID 036 - CID 0100 - FMI 04 Engine Oil Pressure short to ground
3500B and 3500B High Displacement Generator Set Engines MID 036 - CID 0100 - FMI 03 Engine Oil Pressure open/short to +batt
3500B and 3500B High Displacement Generator Set Engines MID 036 - CID 0100 - FMI 13 Engine Oil Pressure calibration required
3500B and 3500B High Displacement Generator Set Engines MID 036 - CID 0542 - FMI 13 Unfiltered Engine Oil Pressure cal required
3500B and 3500B High Displacement Generator Set Engines MID 036 - CID 0542 - FMI 04 Unfiltered Engine Oil Pressure short to ground
365B and 365B Series II Excavators Supplement for 3196 Engine Engine Oil Filter and Oil Filter Base - Remove and Install
365B and 365B Series II Excavators Supplement for 3196 Engine Electric Starting Motor - Remove and Install
365B and 365B Series II Excavators Supplement for 3196 Engine Engine - Install
3064 and 3066 Engines for Caterpillar Built Machines Crankshaft Front Seal - Install
3064 and 3066 Engines for Caterpillar Built Machines Crankshaft Main Bearings - Install
3064 and 3066 Engines for Caterpillar Built Machines Crankshaft Main Bearings - Remove
3126B Engine for Caterpillar Built Machines Main Bearing Journal
365B, 365B Series II, 365BL and 365BL Series II Excavators Machine Systems Main Hydraulic Pump - Disassemble
318B Excavator Machine System Specifications Piston Pump (Main)
302.5 Mini Hydraulic Excavator Hydraulic System Relief Valve (Line)
3003, 3013, 3014 and 3024 Engines for Caterpillar Built Machines Housing (Front) - Remove
3304B and 3306B Engines for Caterpillar Built Machines Engine Balancer Shaft Bearings - Remove and Install
3003, 3013, 3014 and 3024 Engines for Caterpillar Built Machines Housing (Front) - Install
318B Excavator Machine System Specifications Swing Motor
301.5, 301.6 and 301.8 Mini Hydraulic Excavators Hydraulic System Pilot Hydraulic System