Jacket Water Heater
Show/hide table
图 1 | g00590751 |
典型实例 |
(1) 涡轮增压器
(2) 电线组件
- 将电线的紧固件拧紧至以下扭矩。 ... 8 N·m (70 lb in)
(3) 加热器
(4) 安装角度
- 按下列角度安装加热器。 ... 43 ± 2 度
注: 用冲头将加热器敲入缸体。 将加热器牢固地安置在缸体上。
Show/hide table
图 2 | g00590801 |
典型实例 |
(1) 涡轮增压器
(2) 电线组件
- 将电线的紧固件拧紧至以下扭矩。 ... 8 N·m (70 lb in)
(3) 加热器
(4) 安装角度
- 按下列角度安装加热器。 ... 30 ± 15 度
注: 用冲头将加热器敲入缸体。 将加热器牢固地安置在缸体上。
Show/hide table
图 3 | g00590902 |
芯组件 典型实例 |
Show/hide table
芯规格     | ||
    | 120 V 系统     | 240 V 系统     |
做功     | 1250 W     | 1250 W     |
电压     | 120 V     | 240 V     |
电流     | 10.4 A     | 5.2 A     |
Show/hide table
图 4 | g00590918 |
芯组件 典型实例 |
Show/hide table
芯规格     | ||
    | 120 V 系统     | 240 V 系统     |
做功     | 1000 W     | 1000 W     |
电压     | 120 伏     | 240 伏     |
电流     | 8.4 A     | 4.2 A     |
Caterpillar Information System:
CIPI UNDERCARRIAGE Arrangements: 1667049, 2372904, 3Q6481, 6Z7988, 6Z7989, 9Q5032, 9Q5040, 9Q5043, 9Q5046, 9Q5047, 9Q5066, 9Q5074, 9Q5097, 9Q5098, 9Q5116, 9Q5134, 9Q5136, 9Q5142, 9Q5147, 9Q5148, 9Q5149, 9Q5172 and 9Q5204 Travel Motor - Test
3126 Truck Engine (Military) Fuel Recommendations
G3500 Engines Crankshaft Front Seal and Wear Sleeve - Install
3126 Truck Engine (Military) Lubricant Information
797 Off-Highway Truck Power Train Solenoid Valve (Final Drive Oil Diverter)
3116 Truck Engine Cooling System Supplemental Coolant Additive (SCA) - Test/Add
G3500 Engines Crankshaft Front Seal and Wear Sleeve - Remove
3116 Truck Engine Belt - Inspect
3508, 3512 and 3516 Generator Set Engines Crankshaft Rear Seal and Wear Sleeve - Install
3114, 3116 and 3126 Industrial, Marine and Generator Set Engines Water Temperature Regulator
3116 Truck Engine Refill Capacities
320B, 320B L and 320B N Excavators Track Adjustment - Adjust
G3606 and G3608 Engines Water Temperature Regulator and Housing - Remove
G3500 Engines Flywheel Housing - Remove
3054 Truck Engine Reference Material
G3606 and G3608 Engines Water Lines - Remove and Install
3408E and 3412E Engines for Caterpillar Built Machines Electric Starting System - Test
3116 Truck Engine Engine Crankcase Breather - Clean
3116 Truck Engine Engine Oil Level - Check
The Installation And The Alignment Of The Two-Bearing Locomotive Generators{4471} The Installation And The Alignment Of The Two-Bearing Locomotive Generators{4471}
G3500B Engines Fuel System Fuel Filter Differential Pressure - Check
G3500B Engines Ignition System Spark Plugs - Inspect/Replace - Spark Plugs that have Precombustion Chambers
3612 and 3616 Engines Temperature Contactor
G3606 and G3608 Engines Crankcase Pressure Sensor - Remove and Install