Water Temperature Regulator and Housing - Remove
拆卸步骤
Show/hide table
| 注意 |
|---|
保持所有零件清洁无杂质。 杂质会造成快速磨损和缩短部件寿命。 |
- 排空冷却系统。
- 卸下联轴器 (1) 。
Show/hide table
 | |
| 图 1 | g00641712 |
典型实例 | |
- 卸下管 (3) 和管 (4) 。
- 卸下水温调节器壳体 (2) 和适配器。
Caterpillar Information System:
3114, 3116 and 3126 Industrial, Marine and Generator Set Engines Jacket Water Heater
CIPI UNDERCARRIAGE Arrangements: 1667049, 2372904, 3Q6481, 6Z7988, 6Z7989, 9Q5032, 9Q5040, 9Q5043, 9Q5046, 9Q5047, 9Q5066, 9Q5074, 9Q5097, 9Q5098, 9Q5116, 9Q5134, 9Q5136, 9Q5142, 9Q5147, 9Q5148, 9Q5149, 9Q5172 and 9Q5204 Travel Motor - Test
3126 Truck Engine (Military) Fuel Recommendations
G3500 Engines Crankshaft Front Seal and Wear Sleeve - Install
3126 Truck Engine (Military) Lubricant Information
797 Off-Highway Truck Power Train Solenoid Valve (Final Drive Oil Diverter)
3116 Truck Engine Cooling System Supplemental Coolant Additive (SCA) - Test/Add
G3500 Engines Crankshaft Front Seal and Wear Sleeve - Remove
3116 Truck Engine Belt - Inspect
3508, 3512 and 3516 Generator Set Engines Crankshaft Rear Seal and Wear Sleeve - Install
3114, 3116 and 3126 Industrial, Marine and Generator Set Engines Water Temperature Regulator
3116 Truck Engine Refill Capacities
G3500 Engines Flywheel Housing - Remove
3054 Truck Engine Reference Material
G3606 and G3608 Engines Water Lines - Remove and Install
3408E and 3412E Engines for Caterpillar Built Machines Electric Starting System - Test
3116 Truck Engine Engine Crankcase Breather - Clean
3116 Truck Engine Engine Oil Level - Check
The Installation And The Alignment Of The Two-Bearing Locomotive Generators{4471} The Installation And The Alignment Of The Two-Bearing Locomotive Generators{4471}
G3500B Engines Fuel System Fuel Filter Differential Pressure - Check
G3500B Engines Ignition System Spark Plugs - Inspect/Replace - Spark Plugs that have Precombustion Chambers
3612 and 3616 Engines Temperature Contactor
G3606 and G3608 Engines Crankcase Pressure Sensor - Remove and Install
3116 Truck Engine Engine Oil and Filter - Change