Swivel - Disassemble
Start By:
- Remove the swivel. Refer to Disassembly and Assembly, "Swivel - Remove".
- Thoroughly clean the outside of the swivel prior to disassembly.
Show/hide table
Illustration 1 g00551208 - Remove four bolts (1) and cover (2) from housing (5). Remove O-ring seal (3) from the housing.
Show/hide table
NOTICE The rotor and housing of the rotary joint can be damaged when the parts are separated from each other. During removal of the rotor from the housing, be sure the press used to separate the components is axially aligned with the rotor.
- Remove snap ring (8) and spacer (4) from rotor (10). Use a press to remove rotor (10) from housing (5).
- Remove nine seals (9) from housing (5).
- Remove O-ring seal (7) from housing (5).
Show/hide table
Illustration 2 g00551416 - Remove dust seal (6) from housing (5).
Caterpillar Information System:
317B Excavator Machine System and Attachment Specifications Stick Lines
3064 and 3066 Engines for Caterpillar Built Machines Gear Group (Front)
3046 Engine For Caterpillar Built Machines Flywheel - Install
320B Excavator Machine System Specifications Stick - 6280 mm (247.2 inch)
M312, M315, M318 and M320 Excavators Hydraulic System Pump Control (Main Hydraulic)
317B Excavator Machine System and Attachment Specifications Boom -
5110B Excavator, 24H Motor Grader, 69D, 769D, 773D, 773E, 776D and 777D Off-Highway Truck/Tractors, 771D, 775D and 775E Quarry Trucks and AD40 Series II, AD45 and AE40 II Underground Articulated Trucks Caterpillar Monitoring System Harness Code Mode
3064 and 3066 Engines for Caterpillar Built Machines Cylinder Head - 3064
320B Excavator Machine System Specifications Lines (Stick Cylinder)
317B Excavator Machine System and Attachment Specifications Lines (Stick Cylinder)
M312, M315, M318 and M320 Excavators Hydraulic System Main Hydraulic Pump
M312, M315, M318 and M320 Excavators Hydraulic System Pump Hydraulic System
307B Excavator Machine Systems Swivel - Assemble
3064 and 3066 Engines for Caterpillar Built Machines Camshaft
3046 Engine For Caterpillar Built Machines Crankshaft Rear Seal - Remove
307B Excavator Machine Systems Swing Motor - Remove
307B Excavator Machine Systems Swing Motor - Install
3046 Engine For Caterpillar Built Machines Crankshaft Rear Seal - Install
317B Excavator Machine System and Attachment Specifications Stick Lines - Short
3046 Engine For Caterpillar Built Machines Flywheel Housing - Remove and Install
317B Excavator Machine System and Attachment Specifications Lines (Stick) - Clamshell
307B Excavator Machine Systems Swing Motor - Disassemble
5130 Excavator Hydraulic System Cooler (Pump Drive Lubrication)
317B Excavator Machine System and Attachment Specifications Lines (Stick) - Long with Medium Pressure