Cylinder Head - 3064
Show/hide table
Illustration 1 | g00527524 |
(1) Cylinder head
-
Use a straightedge and a feeler gauge to check the cylinder head for warpage.
- Flatness of the cylinder head over total span ... 0.05 mm (0.002 inch)
- Resurface the cylinder head if the warpage exceeds the following amount. ... 0.20 mm (0.008 inch)
- Gasket thickness of cylinder head ... 1.70 ± 0.10 mm (0.070 ± 0.004 inch)
- Thickness of new head ... 95.00 ± 0.10 mm (3.740 ± 0.004 inch)
- Minimum thickness of cylinder head ... 94.70 mm (3.728 inch)
Note: The repair limit of the contact surface of the gasket and the repair limit of the cylinder block surface is 0.20 mm (0.008 inch).
Show/hide table
Illustration 2 | g00527556 |
Numerical sequence of bolts for 3064 Engine |
Put clean engine oil on the threads of the cylinder head bolts. Install the bolts and tighten the bolts in the appropriate numerical sequence to the following torque. ... 118 ± 5 N·m (87 ± 4 lb ft)
Caterpillar Information System:
320B Excavator Machine System Specifications Lines (Stick Cylinder)
317B Excavator Machine System and Attachment Specifications Lines (Stick Cylinder)
M312, M315, M318 and M320 Excavators Hydraulic System Main Hydraulic Pump
M312, M315, M318 and M320 Excavators Hydraulic System Pump Hydraulic System
317B Excavator Machine System and Attachment Specifications Lines (Stick Cylinder)
5110B Excavator, 24H Motor Grader, 69D, 769D, 773D, 773E, 776D and 777D Off-Highway Truck/Tractors, 771D, 775D and 775E Quarry Trucks and AD40 Series II, AD45 and AE40 II Underground Articulated Trucks Caterpillar Monitoring System System Schematic
3408E and 3412E Engines for Caterpillar Built Machines Fuel System
M312, M315, M318 and M320 Excavators Hydraulic System Electronic Control System
M312, M315, M318 and M320 Excavators Hydraulic System Main Hydraulic System
5130 Excavator Hydraulic System Accumulator (Pilot)
M312, M315, M318 and M320 Excavators Hydraulic System Main Hydraulic System
320B Excavator Machine System Specifications Stick Cylinder
5110B Excavator, 24H Motor Grader, 69D, 769D, 773D, 773E, 776D and 777D Off-Highway Truck/Tractors, 771D, 775D and 775E Quarry Trucks and AD40 Series II, AD45 and AE40 II Underground Articulated Trucks Caterpillar Monitoring System Harness Code Mode
317B Excavator Machine System and Attachment Specifications Boom -
M312, M315, M318 and M320 Excavators Hydraulic System Pump Control (Main Hydraulic)
320B Excavator Machine System Specifications Stick - 6280 mm (247.2 inch)
3046 Engine For Caterpillar Built Machines Flywheel - Install
3064 and 3066 Engines for Caterpillar Built Machines Gear Group (Front)
317B Excavator Machine System and Attachment Specifications Stick Lines
307B Excavator Machine Systems Swivel - Disassemble
307B Excavator Machine Systems Swivel - Assemble
3064 and 3066 Engines for Caterpillar Built Machines Camshaft
3046 Engine For Caterpillar Built Machines Crankshaft Rear Seal - Remove
307B Excavator Machine Systems Swing Motor - Remove