Seat - Remove and Install
Removal Procedure
- Open the cab door. Lock the cab door in the OPEN position.
- Remove four socket head bolts (1) .
Show/hide table
Illustration 1 | g00364592 |
- If the seat assembly is equipped with a seat heater, disconnect the wiring harness for the seat heater.
- Use two people to remove seat assembly (2) from the cab. The weight of the seat assembly is approximately 34 kg (75 lb) .
Installation Procedure
- Use two people to position seat assembly (2) in the cab. The weight of the seat assembly is approximately 34 kg (75 lb) .
Show/hide table
Illustration 2 | g00364592 |
- Install the four socket head bolts (1) .
- If the seat assembly is equipped with a seat heater, connect the wiring harness for the seat heater.
- Sit in the seat assembly with the operator's back against the back of the seat assembly. Adjust the seat assembly so that the operator is able to move the pedals completely forward and rearward. Refer to Operation and Maintenance Manual, "Seat Adjustment" for more information.
- Close the door to the cab.
Caterpillar Information System:
315B Excavator Excavator Systems Fuel Tank - Install
315B Excavator Excavator Systems Counterweight - Remove and Install
3114, 3116 and 3126 MUI Engine Governors Dual Horsepower (Type VII)
365B, 365B Series II, 365BL and 365BL Series II Excavators Machine Systems Final Drive - Disassemble
317B Excavator Machine System and Attachment Specifications Travel Motor
315B Excavator Excavator Systems Boom - Install
315B Excavator Excavator Systems Boom Bearings and Seals - Install
315B Excavator Excavator Systems Boom Bearings and Seals - Remove
315B Excavator Excavator Systems Boom - Remove
318B Excavator Machine System Specifications Travel Motor Guard
315B Excavator Excavator Systems Boom Cylinder - Install
3114, 3116 and 3126 MUI Engine Governors Dual Horsepower (Type VI)
3114, 3116 and 3126 MUI Engine Governors Fuel Transfer Pump
3114, 3116 and 3126 MUI Engine Governors Governor (Type I) - Disassemble
302.5 Mini Hydraulic Excavator Boom and Stick Linkage - Lubricate
3176C and 3196 Engines For Caterpillar Built Machines Turbocharger - Remove
365B, 365B Series II, 365BL and 365BL Series II Excavators Machine Systems Final Drive - Assemble
307B Excavator Attachment Hydraulic System Two Pump Operation
3176C and 3196 Engines For Caterpillar Built Machines Turbocharger - Install
5130 Excavator Hydraulic System Relief Valve (Pilot)
317B Excavator Machine System and Attachment Specifications Lines (Travel Motor)
3176C and 3196 Engines For Caterpillar Built Machines Crankshaft Rear Seal Carrier - Remove and Install
5130 Excavator Hydraulic System Solenoid Valve (Boom Float)
302.5 Mini Hydraulic Excavator Bucket Linkage - Lubricate