Fuel Tank - Install
Installation Procedure
Show/hide table
Required Tools     | |||
---|---|---|---|
Tool     | Part Number     | Part Description     | Qty     |
A     | 138-7573     | Link Bracket     | 2     |
- Fasten Tooling (A) to the fuel tank, as shown. Use a suitable lifting device to support the fuel tank. Install the fuel tank. The weight of the fuel tank is 80 kg (175 lb) .
Show/hide table
Illustration 1 | g00363848 |
- Install four bolts (16) that secure the fuel tank to the machine. Tighten four bolts (16) to a torque of 270 ± 40 N·m (200 ± 30 lb ft) .
Show/hide table
Illustration 2 | g00480545 |
This view is beneath the machine. |
- Install bolt (15) that secures the fuel hose to the fuel tank.
- Install the fuel hose and tighten hose clamp (17) .
- Connect electrical connector (14) .
Show/hide table
Illustration 3 | g00480542 |
- Install two nuts (12) that secure hose (13) to the back of the fuel tank.
- Install hose (13) and tighten hose clamp (11) .
- Install three bolts (10) and the washers that secure hand rail (9) to the machine.
Show/hide table
Illustration 4 | g00480543 |
- Install four bolts (7) and the washers that secure side panel (8) .
Show/hide table
Illustration 5 | g00480541 |
- Install bolt (6) .
Show/hide table
Illustration 6 | g00480540 |
This view is inside of the storage box. |
- Install front cover (5) . Install two bolts (4) and the washers that secure front cover (5) to the machine.
Show/hide table
Illustration 7 | g00363838 |
- Secure plate (2) to the machine. Install two bolts (3) and the washers and tighten two bolts (1) .
Show/hide table
Illustration 8 | g00363835 |
- Fill the fuel tank with fuel. Refer to Operation and Maintenance Manual, "Lubricant Viscosities and Refill Capacities" for the correct filling procedure and the correct level for the fuel tank.
Caterpillar Information System:
315B Excavator Excavator Systems Counterweight - Remove and Install
3114, 3116 and 3126 MUI Engine Governors Dual Horsepower (Type VII)
365B, 365B Series II, 365BL and 365BL Series II Excavators Machine Systems Final Drive - Disassemble
317B Excavator Machine System and Attachment Specifications Travel Motor
315B Excavator Excavator Systems Boom - Install
315B Excavator Excavator Systems Boom Bearings and Seals - Install
315B Excavator Excavator Systems Boom Bearings and Seals - Remove
315B Excavator Excavator Systems Boom - Remove
318B Excavator Machine System Specifications Travel Motor Guard
315B Excavator Excavator Systems Boom Cylinder - Install
3114, 3116 and 3126 MUI Engine Governors Dual Horsepower (Type VI)
3114, 3116 and 3126 MUI Engine Governors Governor Bumper Spring (Some Type IV)
315B Excavator Excavator Systems Seat - Remove and Install
3114, 3116 and 3126 MUI Engine Governors Fuel Transfer Pump
3114, 3116 and 3126 MUI Engine Governors Governor (Type I) - Disassemble
302.5 Mini Hydraulic Excavator Boom and Stick Linkage - Lubricate
3176C and 3196 Engines For Caterpillar Built Machines Turbocharger - Remove
365B, 365B Series II, 365BL and 365BL Series II Excavators Machine Systems Final Drive - Assemble
307B Excavator Attachment Hydraulic System Two Pump Operation
3176C and 3196 Engines For Caterpillar Built Machines Turbocharger - Install
5130 Excavator Hydraulic System Relief Valve (Pilot)
317B Excavator Machine System and Attachment Specifications Lines (Travel Motor)
3176C and 3196 Engines For Caterpillar Built Machines Crankshaft Rear Seal Carrier - Remove and Install
5130 Excavator Hydraulic System Solenoid Valve (Boom Float)