Counterweight - Remove and Install
Removal Procedure
- Start the machine. Place the bucket on the ground. Stop the engine.
- Open the hood of the machine.
- Fasten a suitable lifting device to the counterweight, as shown.
Show/hide table
Illustration 1 | g00363768 |
- Remove four bolts (1) and the spacers that hold the counterweight to the swing frame of the machine. Remove the counterweight. The weight of the counterweight is approximately 3300 kg (7275 lb) .
Show/hide table
Illustration 2 | g00363796 |
This view is below the counterweight. |
Installation Procedure
- Put 4C-5592 Anti-Seize Compound on the threads of four mounting bolts (1) and the face of the four spacers.
Show/hide table
Illustration 3 | g00363796 |
This view is below the counterweight. |
- Fasten a suitable lifting device to the counterweight, as shown. The weight of the counterweight is 3300 kg (7275 lb) .
Show/hide table
Illustration 4 | g00363768 |
- Install the four spacers and four bolts (1) that hold the counterweight to the swing frame of the machine.
- Close the hood of the machine.
Caterpillar Information System:
3114, 3116 and 3126 MUI Engine Governors Dual Horsepower (Type VII)
365B, 365B Series II, 365BL and 365BL Series II Excavators Machine Systems Final Drive - Disassemble
317B Excavator Machine System and Attachment Specifications Travel Motor
315B Excavator Excavator Systems Boom - Install
315B Excavator Excavator Systems Boom Bearings and Seals - Install
315B Excavator Excavator Systems Boom Bearings and Seals - Remove
315B Excavator Excavator Systems Boom - Remove
318B Excavator Machine System Specifications Travel Motor Guard
315B Excavator Excavator Systems Boom Cylinder - Install
3114, 3116 and 3126 MUI Engine Governors Dual Horsepower (Type VI)
3114, 3116 and 3126 MUI Engine Governors Governor Bumper Spring (Some Type IV)
3114, 3116 and 3126 MUI Engine Governors Governor Bias Spring (Most Types IV, V, and VI)
315B Excavator Excavator Systems Fuel Tank - Install
315B Excavator Excavator Systems Seat - Remove and Install
3114, 3116 and 3126 MUI Engine Governors Fuel Transfer Pump
3114, 3116 and 3126 MUI Engine Governors Governor (Type I) - Disassemble
302.5 Mini Hydraulic Excavator Boom and Stick Linkage - Lubricate
3176C and 3196 Engines For Caterpillar Built Machines Turbocharger - Remove
365B, 365B Series II, 365BL and 365BL Series II Excavators Machine Systems Final Drive - Assemble
307B Excavator Attachment Hydraulic System Two Pump Operation
3176C and 3196 Engines For Caterpillar Built Machines Turbocharger - Install
5130 Excavator Hydraulic System Relief Valve (Pilot)
317B Excavator Machine System and Attachment Specifications Lines (Travel Motor)
3176C and 3196 Engines For Caterpillar Built Machines Crankshaft Rear Seal Carrier - Remove and Install