Crankshaft Rear Seal Carrier - Remove and Install
Show/hide table
所需工具 | |||
工具 | 零件号 | 零件描述 | 数量 |
A | 5F-4764 | 撬杆 | 1 |
开始:
- 拆下飞轮壳体。 请参阅拆解和组装 , "飞轮壳体 - 拆卸和安装 "。
- 拆下螺母 (1)。 拆除将曲轴后密封托架 ( 3) 固定在缸体上的垫圈和螺栓 ( 2)。
- 用工具 (A) 小心地将曲轴后密封托架 ( 3) 从曲轴上撬离。
- 拆除缸体和曲轴后密封托架 ( 3) 之间的密封垫。
Show/hide table
图 1 | g01021163 |
- 将新密封垫放在定位销 ( 4) 上。
Show/hide table
图 3 g01021163 - 将曲轴后密封托架 ( 3) 安置在曲轴上。
- 安装螺母 (1)。 安装垫圈和螺栓 (2)。
Show/hide table
图 2 | g01028714 |
结束:
- 安装飞轮壳体。 请参阅拆解和组装 , "飞轮壳体 - 拆卸和安装"。
Caterpillar Information System:
317B Excavator Machine System and Attachment Specifications Lines (Travel Motor)
5130 Excavator Hydraulic System Relief Valve (Pilot)
3176C and 3196 Engines For Caterpillar Built Machines Turbocharger - Install
307B Excavator Attachment Hydraulic System Two Pump Operation
365B, 365B Series II, 365BL and 365BL Series II Excavators Machine Systems Final Drive - Assemble
3176C and 3196 Engines For Caterpillar Built Machines Turbocharger - Remove
302.5 Mini Hydraulic Excavator Boom and Stick Linkage - Lubricate
3114, 3116 and 3126 MUI Engine Governors Governor (Type I) - Disassemble
3114, 3116 and 3126 MUI Engine Governors Fuel Transfer Pump
315B Excavator Excavator Systems Seat - Remove and Install
315B Excavator Excavator Systems Fuel Tank - Install
315B Excavator Excavator Systems Counterweight - Remove and Install
5130 Excavator Hydraulic System Solenoid Valve (Boom Float)
302.5 Mini Hydraulic Excavator Bucket Linkage - Lubricate
3176C and 3196 Engines For Caterpillar Built Machines Accessory Drive - Disassemble
3176C and 3196 Engines For Caterpillar Built Machines Accessory Drive - Assemble
5130 Excavator Hydraulic System Solenoid Valve (Swing Parking Brake)
5130 Excavator Hydraulic System Solenoid Valve (Bottom Dump)
3176C and 3196 Engines For Caterpillar Built Machines Camshaft Gear - Remove and Install
3176C and 3196 Engines For Caterpillar Built Machines Crankshaft Gear - Remove and Install
A13 Auger Chain - Inspect/Adjust
315B Excavator Excavator Systems Track Carrier Roller - Assemble
A13 Auger Chain - Lubricate
3176C and 3196 Industrial Engines Electronic Control Module - Remove and Install