Governor (Type III)
Show/hide table
Illustration 1 | g00519863 |
Typical Type III Governor (1) Type I throttle |
The type code for the Type III governor is "C". These governors are also known as Generator Set Governors.
Note: Some Type III governors were produced with Type I throttle levers and features. Some Type III governors were produced with Type II throttle levers and features. The throttle lever and the features will determine the correct service procedures for the Type III governor.
Type III governors include the following part numbers:
Show/hide table
Part Numbers For Type III Governors     | |
7C-6562     | 7C-8593     |
7E-4140     | 7E-4150     |
Caterpillar Information System:
3114, 3116 and 3126 MUI Engine Governors Governor (Type II)
G3304 and G3306 Engines Electric Starting Motor
3114, 3116 and 3126 MUI Engine Governors Governor (Type I)
3304B and 3306B Engines for Caterpillar Built Machines Crankshaft - Install
3406E Truck Engine Glossary of Electronic Control Terms
3114, 3116 and 3126 MUI Engine Governors Governor Identification - Introduction
3408E and 3412E Engines for Caterpillar Built Machines Fuel Filter Base
3306B Industrial Engine Crankshaft - Remove
3304B and 3306B Engines for Caterpillar Built Machines Connecting Rod Bearings - Install
3406E On-Highway Engine Crankshaft Main Bearings - Remove
G3304 and G3306 Engines Seal Adapter (Front)
3304B and 3306B Engines for Caterpillar Built Machines Connecting Rod Bearings - Remove
3306B Industrial Engine Air Starting Motor
3114, 3116 and 3126 MUI Engine Governors Governor (Type IV)
3114, 3116 and 3126 MUI Engine Governors Governor (Type V)
3114, 3116 and 3126 MUI Engine Governors Governor (Type VI)
3114, 3116 and 3126 MUI Engine Governors Specification
3114, 3116 and 3126 MUI Engine Governors Governor Performance Data
3406C Engines for Caterpillar Built Machines Cylinder Block
3306B Industrial Engine Shutoff Solenoid
3306B Industrial Engine Magnetic Pickup
3304B and 3306B Engines for Caterpillar Built Machines Crankshaft Front Seal - Remove
3304B and 3306B Engines for Caterpillar Built Machines Crankshaft Main Bearings - Remove
3408E and 3412E Engines for Caterpillar Built Machines Cylinder Liner - Remove