Technical Marketing Information (TMI)
Governor performance data and specifications are stored in the Technical Marketing Information (TMI). The TMI is available on-line in the Caterpillar Network. Governor performance data and specifications in the TMI that is obtained from the Caterpillar Network is the most current information available.
The TMI is located in AIMS in the Caterpillar Network. Information for accessing the TMI and finding the governor performance data and specifications for a given governor are contained in this section. Instructions for accessing the Caterpillar Network are also provided. For further information, refer to the TMI Wizard, LEXQ6016. Also, refer to the FIND User's Guide, YELX1000. The FIND User's Guide provides information that is necessary to use the Caterpillar "FIND" system.
Note: Governor performance data and specifications are not available in paper. Technical Marketing Information (TMI) is the only source for this information.
Note: The part number and the change level for a governor will be necessary to obtain governor performance data and specifications.
Accessing TMI Data
After accessing AIMS in the Caterpillar network, perform the following Steps in order to find the governor recheck information.
- Press the "Pause/Break" key in order to clear the screen. The screen should now be blank with the cursor in the upper left corner.
Illustration 1 | g00682780 |
The screen should show the above display after AIMS is accessed. |
- At the cursor on the blank screen, type "acf2m" in order to access the AIMS menu.
- Press the "Enter" key.
- Press the "Enter" key.
Illustration 2 | g00683525 |
The screen should show the above display. |
- Place an "S" in front of the application number that is applicable to the information that is needed. For this example, "GKN401 TMI - GENERAL ENGINE DATA" (1) is chosen.
Illustration 3 | g00785418 |
The screen should show the above display. |
- Press the "Enter" key.
- Enter the "PROGRAM SELECTION NO." (3). For this example, number 12 "PHYSICAL DATA - ENGINE" (2) has been chosen.
Illustration 4 | g00785419 |
The screen should show the above display. |
- Press the "Enter" key.
- Enter the governor part number in "ARRG/GP NUMBER" field (4). For this example, the governor part number is 142-1421 Unit Injector Governor .
Illustration 5 | g00683606 |
- Enter the change level in the "CHANGE LEVEL" field (5). For this example, the change level is "00". To obtain the latest change level, this field can be left blank.
- Press the "Enter" key.
- Enter the "FORMAT" number in the "PERF DATA LINE NO" field (6). For this example, "010" is the number that is entered in the "PERF DATA LINE NO" field. This entry will show the "GOVERNOR RECHECK PERFORMANCE DATA".
Illustration 6 | g00683697 |
The screen should show the above display. |
- Press the "Enter" key.
- The first screen of the "GOVERNOR RECHECK PERFORMANCE DATA" contains pertinent part numbers and settings for a particular governor.
Illustration 7 | g00683710 |
The screen should show the above display. |
- Press the "Enter" key.
- Press the "Enter" key.
Illustration 8 | g00683713 |
The screen should show the above display. |
- After the information is retrieved, press the "Pause/Break" key in order to clear the screen.
Illustration 9 | g00683715 |
The screen should show the above display. |
Note: The "Enter" key toggles through the "GOVERNOR RECHECK PERFORMANCE DATA" screens in this program.
- At the cursor on the blank screen, type "/rcl" in order to exit the AIMS system.