Note: All screens are English only.
This service program code is used to view various sections of the machine status. The message area will show:
- The version of the source software
- The version of the configuration software
- The version of the experimental source software that is installed for factory development
Note: The "change level" of the production software (source software and the configuration software) is always zero. The version number of the configuration software is changed when the configuration is revised by Information System Builder (ISB).
Illustration 1 | g00548354 |
Pressing the ">" key will allow other aspects of the machine status to be displayed in the following order. The machine status and corresponding message area display are shown here:
- The CAT part number and the Hardware Version (Main Module)
Illustration 2 | g00485816 |
Illustration 3 | g00485817 |
- Model Number
This message will display the model number of the machine.
Illustration 4 | g00550459 |
- Serial Number (Product Identification Number)
Illustration 5 | g00537449 |
- Equipment Number
Note: The Equipment Number is assigned by the customer.
Illustration 6 | g00485840 |
- Attachment Code
Attachment codes are used on large wheel loaders. Attachment codes are also used on the 5230 7LL99-Up Excavators. The attachment code will be “00” for most applications.
Illustration 7 | g00485841 |
- Choice of Language
Illustration 8 | g00485842 |
- Configuration Type
This message will display "VIMS" or "VIDS":
Illustration 9 | g00485843 |
- Operator ID
The Operator ID will be used with all stored onboard information. The Operator ID may be up to 7 characters (numbers and letters) in length.
Illustration 10 | g00485844 |