Bucket Positioner
Show/hide table
 |
Use caution to avoid possible personal injury when adjusting the bucket positioner. Stop the engine and lower all equipment to relieve the hydraulic pressure. Engage the parking brake and block the tires to prevent sudden movement of the machine. Keep unauthorized personnel off the machine. |
 |
- Start the engine. Lower the bucket to the ground.
- Position the bucket at the desired angle to the ground. Turn the engine start switch key to the OFF position and remove the engine start switch key. Move the bucket tilt lever to the NEUTRAL position.
- Loosen the four bolts (1) that clamp the tube assembly (2) of the switch. Move the tube assembly down the cylinder in order to increase the digging angle. Move the tube assembly up the cylinder in order to decrease the digging angle.
Show/hide table
 | |
| Illustration 1 | g00484180 |
- To test the adjustment, start the engine. Raise the bucket. Move the bucket tilt lever to the TILT BACK detent position.
- When the bucket reaches the preset digging angle, the bucket tilt lever should return to the HOLD position.
Caterpillar Information System:
24H Motor Grader Power Train Torque Converter
D250E Series II, D300E Series II, D350E Series II and D400E Series II Articulated Trucks Power Train Electronic Control System CID 0707 FMI 05 Solenoid Valve (Upshift) Current Below Normal - Test
IT14G Integrated Toolcarrier Bucket Lift Kickout
IT14G Integrated Toolcarrier Parking Brake Control
69D and 769D Off-Highway Trucks and 771D Quarry Truck Machine Systems Service and Parking Brake (Rear) - Disassemble
69D and 769D Off-Highway Trucks and 771D Quarry Truck Machine Systems Air Conditioner and Heater Fan Motor - Remove and Install
561M Pipelayer Track Idler
AP-1055B and BG-2455C Asphalt Pavers Tow Arm Joint Nuts - Tighten
AP-1055B and BG-2455C Asphalt Pavers Track Roller Bearings - Lubricate
AP-1055B and BG-2455C Asphalt Pavers Track Takeup Linkage - Lubricate
AP-1055B and BG-2455C Asphalt Pavers Track Tension - Check
AP-1055B and BG-2455C Asphalt Pavers Tracks - Inspect
5130, 5130B and 5230 Excavators, 784B, 785B, 785C, 789B, 789C, 793B and 793C Off-Highway Truck/Tractors and 992G, 994 and 994D Wheel Loaders Vital Information Management System (VIMS) Keypad
D250E Series II, D300E Series II, D350E Series II and D400E Series II Articulated Trucks Power Train Electronic Control System CID 0707 FMI 06 Solenoid Valve (Upshift) Current Above Normal - Test
AP-1055B and BG-2455C Asphalt Pavers Pump Drive Oil Sample - Obtain
AP-1050B and BG-245C Asphalt Pavers Pump Drive Oil Level - Check
AP-1055B and BG-2455C Asphalt Pavers Pump Drive Breather - Clean
AP-1055B and BG-2455C Asphalt Pavers Propel System Oil Filters - Replace
561M Pipelayer Track Roller Frame
AP-1055B and BG-2455C Asphalt Pavers Hydraulic System Oil Sample - Obtain
AP-1055B and BG-2455C Asphalt Pavers Hydraulic System Oil Level - Check
AP-1055B and BG-2455C Asphalt Pavers Hydraulic System Oil Filter - Replace
AP-1055B and BG-2455C Asphalt Pavers Hydraulic System Oil - Change
AP-1055B and BG-2455C Asphalt Pavers Hopper Cylinder Bearings - Lubricate