Hydraulic System Oil Filter - Replace
Show/hide table
Illustration 1 | g00570050 |
- Clean the filter housing and clean the hose connections.
- Remove the four bolts (1) from the housing cover (2).
- Remove the filter from the housing. Dispose of the filter in a proper manner.
- Inspect the gasket and clean the gasket. Replace the gasket if the gasket is damaged.
- Position the new gasket and lower the new filter into the housing.
- Install the bolts.
- Start the engine. Allow the engine to run for several minutes. Check the hydraulic system for leaks.
- Repair any leaks before you operate the machine.
Caterpillar Information System:
AP-1055B and BG-2455C Asphalt Pavers Hydraulic System Oil Level - Check
AP-1055B and BG-2455C Asphalt Pavers Hydraulic System Oil Sample - Obtain
561M Pipelayer Track Roller Frame
AP-1055B and BG-2455C Asphalt Pavers Propel System Oil Filters - Replace
AP-1055B and BG-2455C Asphalt Pavers Pump Drive Breather - Clean
AP-1050B and BG-245C Asphalt Pavers Pump Drive Oil Level - Check
AP-1055B and BG-2455C Asphalt Pavers Pump Drive Oil Sample - Obtain
D250E Series II, D300E Series II, D350E Series II and D400E Series II Articulated Trucks Power Train Electronic Control System CID 0707 FMI 06 Solenoid Valve (Upshift) Current Above Normal - Test
5130, 5130B and 5230 Excavators, 784B, 785B, 785C, 789B, 789C, 793B and 793C Off-Highway Truck/Tractors and 992G, 994 and 994D Wheel Loaders Vital Information Management System (VIMS) Keypad
IT14G Integrated Toolcarrier Bucket Positioner
24H Motor Grader Power Train Torque Converter
D250E Series II, D300E Series II, D350E Series II and D400E Series II Articulated Trucks Power Train Electronic Control System CID 0707 FMI 05 Solenoid Valve (Upshift) Current Below Normal - Test
AP-1055B and BG-2455C Asphalt Pavers Hydraulic System Oil - Change
AP-1055B and BG-2455C Asphalt Pavers Hopper Cylinder Bearings - Lubricate
AP-1055B and BG-2455C Asphalt Pavers Fuel Tank Water and Sediment - Drain
AP-1055B and BG-2455C Asphalt Pavers Fuel Tank Cap and Strainer - Clean
793C Off-Highway Truck Air Dryer - Check
D250E Series II, D300E Series II, D350E Series II and D400E Series II Articulated Trucks Power Train Electronic Control System CID 0708 FMI 03 Solenoid Valve (Downshift) Voltage Above Normal - Test
D250E Series II, D300E Series II, D350E Series II and D400E Series II Articulated Trucks Power Train Electronic Control System CID 0708 FMI 05 Solenoid Valve (Downshift) Current Below Normal - Test
IT14G Integrated Toolcarrier and 914G Wheel Loader Machine Systems Metering Pump (Steering) - Remove
793C Off-Highway Truck Air Dryer Desiccant - Replace
D250E Series II, D300E Series II, D350E Series II and D400E Series II Articulated Trucks Power Train Electronic Control System CID 0708 FMI 06 Solenoid Valve (Downshift) Current Above Normal - Test
561M Pipelayer Undercarriage
24H Motor Grader Transmission Electronic Control System And Hydraulic Calibrations Backup Alarm