- Articulated Truck:
- 725 (S/N: AFX1-UP)
- 730 (S/N: AGF1-UP)
- 735 (S/N: AWR1-UP)
- 740 (S/N: AXM1-UP)
- 740Ejector (S/N: AZZ1-UP)
Description of Change: A new mirror and mirror support is now being used. This change provides the following benefits: greater durability, reduced vibration and improved rear view visibility.
Adaptable To: A new 222-7374 Mirror is now being used. The previous design included the 203-0780 Mirror. This is the auxiliary mirror that is mounted above the main 5P-6879 Mirror .
A new 222-5110 Support Assembly is now being used. These changes are effective with 725 S/N:AFX665
, 730 S/N:AGF665
, 735 S/N:AWR331
, 740 S/N:AXM595
and 740 Ejector S/N:AZZ278
.
The changes to the 149-0150 Mirror Group for the 725 and the 730 and the 211-7978 Mirror Group for the 735, 740 and the 740 Ejector are adaptable to all earlier machines.
 | |
| Illustration 1 | g00917151 |
(1) Radius ... 42 ± 2.5 mm (1.65 ± 0.1 inch)
(2) 260 ± 1 mm (10.24 ± 0.04 inch)
(3) 220 ± 1 mm (8.67 ± 0.04 inch)
(4) 245 ± 2 mm (9.65 ± 0.08 inch)
(5) 30° ± 2° The new 222-5110 Mirror Support can be made from the existing 7U-1903 Support by fabricating an additional support that is described in illustration 1. Weld the new support to the 7U-1903 Support as shown in illustration 2.
 | |
| Illustration 2 | g00917962 |
Use steel tubing. The tubing should measure 19 mm (0.75 inch) for the outside diameter and 2.5 mm (0.10 inch) for the wall thickness.
The weld (B) should be a 3 mm (0.12 inch) fillet weld that goes completely around the joint.
Note: The previous mirror supports and the previous mirrors will continue to be serviced.
 | |
| Illustration 3 | g00956471 |
Finished view of the Right side of the truck (1) 222-7374 Mirror (New) (2) 222-5110 Mirror Support (New). Can be made from 7U-1903 Mirror Support. (3) 5P-6879 Mirror | |