Pump Mounting - Remove and Install
Show/hide table
Required Tools | |||
---|---|---|---|
Tool | Part Number | Part Description | Qty |
A | 180-3033 | Stand | 1 |
B | 180-3034 | Stand | 2 |
Start By:
- Remove the engine. Refer to Disassembly and Assembly, "Engine - Remove".
- Use Tooling (A) and Tooling (B) to support the engine. Remove bolts (1). Remove clip (2). Remove adapter plate (3).
Show/hide table
Illustration 2 g00916409 - Remove bolts (4). Remove nylon flange (5).
Show/hide table
Illustration 3 g00916623 - Remove bolt (7). Remove hub (6).
Show/hide table
Illustration 1 | g00916410 |
Show/hide table
Required Tools | |||
---|---|---|---|
Tool | Part Number | Part Description | Qty |
A | 180-3033 | Stand | 1 |
B | 180-3034 | Stand | 2 |
C | 9S-3263 | Thread Lock Compound | 1 |
- Install hub (6). The face of hub (6) must be installed to a dimension of
65.3 ± 2.0 mm (2.60 ± 0.08 inch) from the face of the pump. This dimension is shown in the graphic above as Dimension (X). Apply Tooling (C) to the entire length of the threads on bolt (7). Tighten bolt (7) to a torque of110 ± 10 N·m (80 ± 7 lb ft) .Note: New models of hub (6) are equipped with an internal stop. Slide hub (6) over the shaft until the internal stop on hub (6) makes contact with the shaft. This will maintain Dimension (X).
Show/hide tableIllustration 5 g00916409 - Install nylon flange (5). Install bolts (4).
Show/hide table
Illustration 6 g00916410 - Install adapter plate (3). Install clip (2). Install bolts (1).
Show/hide table
Illustration 4 | g00916623 |
End By:
- Install the engine. Refer to Disassembly and Assembly, "Engine - Install".
Caterpillar Information System:
938G Series II Wheel Loader and IT38G Series II Integrated Toolcarrier Braking System Brake Accumulator
CB-534D, CB-534D XW and CB-564D Paving Compactors Machine Systems Water Spray Pump
CB-534D, CB-534D XW and CB-564D Paving Compactors Machine Systems Water Filter
Bench Test Procedure for a 784B, 784C, 785, 785B, 785C,785D, 789, and 789B Off-Highway Truck Transmission{3030, 3073} Bench Test Procedure for a 784B, 784C, 785, 785B, 785C,785D, 789, and 789B Off-Highway Truck Transmission{3030, 3073}
776D, 777D and 777D HAA Off-Highway Truck/Tractors Power Train Pressure Switch (Secondary Brake and Parking Brake)
CB-534D, CB-534D XW and CB-564D Paving Compactors Machine Systems Water Tank
CB-534D, CB-534D XW and CB-564D Paving Compactors Machine Systems Radiator and Hydraulic Oil Cooler
CB-534D, CB-534D XW and CB-564D Paving Compactors Machine Systems Radiator Guard
CB-534D, CB-534D XW and CB-564D Paving Compactors Machine Systems Gear Motor (Fan Drive)
CB-534D, CB-534D XW and CB-564D Paving Compactors Machine Systems Flood Lamp
CB-534D, CB-534D XW and CB-564D Paving Compactors Machine Systems Battery and Wiring Group
120H, 12H, 135H, 140H, 143H, 160H and 163H Motor Graders Data Link
R2900 Load Haul Dump Throttle Control
CB-534D, CB-534D XW and CB-564D Paving Compactors Machine Systems Spray Bar
120H, 12H, 135H, 140H, 143H, 14H, 160H, 163H and 16H Motor Graders Secondary Steering System Hydraulic Schematic
2002/11/11 New Mirror Has Improved Durability and a New Support that Reduces Vibration {7319}
924H, 924HZ, 928HZ and 930H Wheel Loaders Axle Oil Cooler Screen - Clean/Replace
R2900 Load Haul Dump Steering Control
776D, 777D and 777D HAA Off-Highway Truck/Tractors Air System and Brakes Hoist, Torque Converter, and Brake System Troubleshooting
776D, 777D and 777D HAA Off-Highway Truck/Tractors Air System and Brakes Pulled Unit Hydraulics, Torque Converter, and Brake System Troubleshooting
574B Forwarder Power Train Power Train Charge System Pressure - Test
Air Conditioning and Heating R-12 All Caterpillar Machines Machine Preparation for Disassembly and Assembly
2002/09/16 The Coils for the Directional Control Valve are now Serviced {5051}
2003/04/21 A Sight Gauge for the Transmission Oil Level and an Oil Filler Tube at Ground Level are Available {3030}