Water Pump - Remove and Install
Show/hide table
| NOTICE |
|---|
|
Keep all parts clean from contaminants. Contaminants may cause rapid wear and shortened component life. |
Show/hide table
| NOTICE |
|---|
|
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids. Refer to Special Publication, NENG2500, "Caterpillar Dealer Service Tool Catalog" for tools and supplies suitable to collect and contain fluids on Caterpillar products. Dispose of all fluids according to local regulations and mandates. |
- Drain the coolant from the cooling system into a suitable container for storage or disposal.
Show/hide table
Illustration 1 g00905296 Show/hide table
Illustration 2 g00905297 - Remove bolts (1) and (2) that fasten the water pump to the front housing.
- Tap water pump (3) with a soft hammer in order to loosen water pump (3).
- Remove water pump (3) and the gasket.
Show/hide table
| NOTICE |
|---|
|
Keep all parts clean from contaminants. Contaminants may cause rapid wear and shortened component life. |
- Install water pump (3) and the gasket.
- Install bolts (2) and (1) that fasten the water pump to the front housing.
- Fill the cooling system with coolant. Refer to Operation and Maintenance, "Refill Capabilities".
Show/hide table
| |
| Illustration 3 | g00905297 |
Show/hide table
| |
| Illustration 4 | g00905296 |
Caterpillar Information System:
3126B Engines for the IT38G Series II Integrated Toolcarrier and the 938G Series II Wheel Loader Can Not Reach Top Engine RPM
3524B Engine for Caterpillar Built Machines Cylinder Head - Remove
2002/10/14 Special Instruction, REHS1402, "Procedure for the Manufacture of a 226-4108 Valve Group " is Available {5051, 5057}
TH220B, TH330B, TH340B, TH350B, TH355B, TH360B, TH460B, TH560B and TH580B Telehandlers MID 117 - CID 0168 - FMI 00
3054E Industrial Engine Cylinder Head Valves
2002/07/29 A New Mixing Valve for the Heater is Used {7304}
2002/07/22 Correction to Operation and Maintenance Manual , "Lubricant Viscosities" {1000, 7000, 7581}
2002/08/26 New Flash File Is Used for Machine Security System (MSS) {7631}
R1700G Load Haul Dump Fire Suppression System - Check - If Equipped
R1700G Load Haul Dump Fan Drive Bearing - Lubricate
R1700G Load Haul Dump Exhaust Purifier - Inspect/Clean
R1700G Load Haul Dump Engine Water Pump - Inspect
3054E Industrial Engine Cylinder Head
R1600 Load Haul Dump Machine Electrical System Circuit Breaker
2002/08/12 A Sealed Switch Panel Offers Additional Switch Protection {7450, 7451}
3524B Engine for Caterpillar Built Machines Cylinder Head - Disassemble
TH220B, TH330B, TH340B, TH350B, TH355B, TH360B, TH460B, TH560B and TH580B Telehandlers MID 117 - CID 0168 - FMI 01
CP-533C, CS-533C, CP-563C, CS-563C, CS-573C and CS-583C Vibratory Compactors Steering System Steering Hydraulic System
2002/08/26 VIMSpc (2002A) is Now Available {7601}
C0.5, C0.7, C1.1/3011C, C1.5/3013C, C1.6 and C2.2/3024C/3024CT Industrial Engines and Engines for Caterpillar Built Machines Air Inlet and Exhaust System
950G Series II Wheel Loader, 962G Series II Wheel Loader and IT62G Series II Integrated Toolcarrier Power Train MID 081 - CID 0168 - FMI 00
TH220B, TH330B, TH340B, TH350B, TH355B, TH360B, TH460B, TH560B and TH580B Telehandlers MID 082 - CID 0271 - FMI 03
3056E Engine for Caterpillar Built Machines Water Outlet Manifold - Remove and Install
3524B Engine for Caterpillar Built Machines Cylinder Head - Assemble