824G Series II Wheel Tractor, 825G Series II Soil Compactor and 826G Series II Landfill Compactor Electrohydraulic System Caterpillar


Implement Electronic Control Pinout Specifications

Usage:

824G II AWW



Illustration 1g00291779

Implement Electronic Control Module

(1) Connector J1. (2) Connector J2.




Illustration 2g00291780

Implement Control Connector

Table 1
40-Pin Connector J1    
Connector Pin     Function    
1     + Battery    
2     Ground    
3     CAT Data Link    
4     Proportional Solenoid (Lower)    
5     Ground    
6     + Battery    
7     Solenoid Return    
8     Pilot On/Off Solenoid Valve    
9     CAT Data Link    
10     Proportional Solenoid (Raise)    
11     Proportional Solenoid (Tilt Right)    
12     Lower Kickout Detent Solenoid    
13     Implement Lockout Switch (normally open switch)    
14     Implement Lockout Switch (normally closed switch)    
15     Digital Return    
16     Digital Return    
17     Proportional Solenoid (Tilt Left)    
18     Unused    
19     Unused    
20     Unused    
21     Unused    
22     Unused    
23     Implement Function Select Switch (normally open switch)    
24     Implement Function Select Switch (normally closed switch)    
25     Unused    
26     Unused    
27     Unused    
28     Unused    
29     Unused    
30     Unused    
31     Unused    
32     Unused    
33     Unused    
34     Unused    
35     Unused    
36     Unused    
37     Unused    
38     Unused    
39     Unused    
40     + + Battery    

Table 2
40-Pin Connector J2    
Connector Pin     Function    
1     Proportional Solenoid (Tip Backward)    
2     Unused    
3     Solenoid Return    
4     Unused    
5     Unused    
6     Unused    
7     Unused    
8     Proportional Solenoid (Tip Forward)    
9     Unused    
10     Unused    
11     Unused    
12     Unused    
13     Unused    
14     Unused    
15     Unused    
16     Unused    
17     Unused    
18     Unused    
19     Unused    
20     Unused    
21     Unused    
22     Unused    
23     Unused    
24     Unused    
25     Unused    
26     Unused    
27     Unused    
28     Unused    
29     Unused    
30     Tilt Lever Sensor    
31     Unused    
32     Unused    
33     Unused    
34     Unused    
35     Lift Lever Sensor    
36     Unused    
37     Unused    
38     Unused    
39     Unused    
40     Unused    

Caterpillar Information System:

2002/03/04 Special Instruction, REHS1282, "Installation of New Bevel Gear and Differential Case (Flange Half)"is Available {3258}
HH45 Harvester Head, HH55 Harvester Head, HH65 Harvester Head and HH75 Harvester Head (CABS) Hydraulic System Diameter Sensor - Calibrate
814F Wheel Tractor, 815F Soil Compactor and 816F Landfill Compactor Machine Systems Window Wiper and Wiper Motor
AS2251 Asphalt Screed Vibratory Group
826G Series II Landfill Compactor, 825G Series II Soil Compactor and 824G Series II Wheel Dozer Diagnostic Capabilities
826G Series II Landfill Compactor, 825G Series II Soil Compactor and 824G Series II Wheel Dozer Engine Supplement Fuel Filter Base and Priming Pump - Install - Engine in Chassis
AS2251 Asphalt Screed Gerotor Motor (Vibratory)
2002/02/25 Correction to Disassembly and Assembly , "Assemble Steering Control Valve" {4307}
824G Series II Wheel Dozer, 825G Series II Soil Compactor and 826G Series II Landfill Compactor Braking System Service Brake Disc Wear Indicator - Check
2002/02/25 Correction to Operation and Maintenance Manual , "Parking Brake Holding Ability Test" {4267}
2002/02/25 Longer Bolts are Used in the Bearing Cage of the Output Transfer Gear Group {3159}
2002/02/25 Service Parts for the Pressure Reducing Valve are now Available {5050, 5467}
RM-350B Road Reclaimer/Soil Stabilizer Circuit Breakers - Reset
2002/04/29 Correction to Disassembly and Assembly , "Differential and Bevel Gear (Center) - Assemble" {3256, 3258}
824H Wheel Dozer, 825H Soil Compactor and 826H Landfill Compactor Power Train MID 081 - CID 0672 - FMI 01
2002/05/13 Correction to Disassembly and Assembly , "Torque Converter - Assemble" {3101}
CB-334D and CB-335D Paving Compactors Propel System Piston Pump Neutral - Test and Adjust
AS2251 Asphalt Screed Burner Group
914G Compact Wheel Loader and IT14G Integrated Toolcarrier Transmission Electronic Control System MID 079 - CID 0168 - FMI 01
AS2251 Asphalt Screed Burner Blower Motor
HH45 Harvester Head, HH55 Harvester Head, HH65 Harvester Head and HH75 Harvester Head (CABS) Hydraulic System Hand Control Keypad - Test
HH45 Harvester Head, HH55 Harvester Head, HH65 Harvester Head and HH75 Harvester Head (CABS) Hydraulic System Length Measuring - Calibrate
824G Series II Wheel Dozer, 825G Series II Soil Compactor and 826G Series II Landfill Compactor Braking System Parking Brake - Test
N3 Series Brushless Alternators Stator - Test
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.