Correction to Specifications, Systems Operation, Testing and Adjusting , "Axle Housing and Bearing Preload - Adjust" {3260}
- Telehandler:
- TH103 (S/N: 3PN2500-UP)
5. Use a feeler gauge to establish clearance (K) at two opposite positions. Calculate the average clearance from the two measurements. Subtract 0.4 ± 0.1 mm (0.015 ± 0.003 inch) to the average measurement. This is the thickness of the shims that are required.
Caterpillar Information System:
768C, 769C, 769D, 772B, 773B, 773D, 776C, 777B, 777D, 784B, 785, 785B, 789, 789B, 793, 793B and 793C Off-Highway Truck/Tractors and 771C, 771D and 775D Quarry Trucks Automatic Retarder Control (ARC) System CID 0710 FMI 06 Solenoid Valve (Auto Retarder Supply) Current Above Normal - Test
3408E and 3412E Engines for Caterpillar Built Machines Cat Data Link Circuit - Test
914G Compact Wheel Loader and IT14G Integrated Toolcarrier Transmission Electronic Control System Features
Installation and Reinforcement Procedures for the Upper Link{7120} Installation and Reinforcement Procedures for the Upper Link{7120}
TH350B, TH355B, TH360B and TH460B Telehandlers Towing the Machine
TH210 and TH215 Telehandlers Power Train Piston Pump (Hydrostatic)
TH210 and TH215 Telehandlers Power Train Piston Motor (Hydrostatic)
TH210 and TH215 Telehandlers Power Train Hydrostatic Drive System
TH350B, TH355B, TH360B and TH460B Telehandlers Plate Locations and Film Locations
TH350B, TH355B, TH360B and TH460B Telehandlers Operation
966G Series II and 972G Series II Wheel Loaders Engine Supplement Electronic Unit Injector Sleeve - Install
966G Series II and 972G Series II Wheel Loaders Engine Supplement Electronic Unit Injector Sleeve - Remove
2001/10/29 Correction To Service Manual Module, SENR1126, "Disassembly And Assembly Of 3500B Machine Engines" , "Remove And Install Cylinder Head Assemblies" {1100, 1101}
768C, 769C, 769D, 772B, 773B, 773D, 776C, 777B, 777D, 784B, 785, 785B, 789, 789B, 793, 793B and 793C Off-Highway Truck/Tractors and 771C, 771D and 775D Quarry Trucks Automatic Retarder Control (ARC) System CID 0710 FMI 12 Solenoid Valve (Auto Retarder Supply) Failed - Test
416D, 420D, 424D, 428D, 430D, 432D, 438D and 442D Backhoe Loaders Hydraulic and Steering System Boom Cylinder
914G Compact Wheel Loader and IT14G Integrated Toolcarrier Transmission Electronic Control System Sensors
768C, 769C, 769D, 772B, 773B, 773D, 776C, 777B, 777D, 784B, 785, 785B, 789, 789B, 793, 793B and 793C Off-Highway Truck/Tractors and 771C, 771D and 775D Quarry Trucks Automatic Retarder Control (ARC) System CID 0711 FMI 03 Solenoid Valve (Auto Retarder Control) Voltage Above Normal - Test
768C, 769C, 769D, 772B, 773B, 773D, 776C, 777B, 777D, 784B, 785, 785B, 789, 789B, 793, 793B and 793C Off-Highway Truck/Tractors and 771C, 771D and 775D Quarry Trucks Automatic Retarder Control (ARC) System CID 0711 FMI 05 Solenoid Valve (Auto Retarder Control) Current Below Normal - Test
773E Off-Highway Truck/Tractor and 775E Quarry Truck Lifting and Tying Down the Machine - 773E Off-Highway Truck
3024C Engine for Caterpillar Built Machines Governor - Disassemble
914G Compact Wheel Loader and IT14G Integrated Toolcarrier Transmission Electronic Control System Relays
CP-433E, CS-423E and CS433E Vibratory Soil Compactors Machine Systems Gear Pump (Steering)
836G Landfill Compactor and 834G Wheel Dozer Steering Control
768C, 769C, 769D, 772B, 773B, 773D, 776C, 777B, 777D, 784B, 785, 785B, 789, 789B, 793, 793B and 793C Off-Highway Truck/Tractors and 771C, 771D and 775D Quarry Trucks Automatic Retarder Control (ARC) System CID 0711 FMI 06 Solenoid Valve (Auto Retarder Control) Current Above Normal - Test