Stopping the Engine
Show/hide table
| NOTICE |
|---|
Stopping the engine immediately after it has been working under load, can result in overheating and accelerated wear of the engine components. Follow the stopping procedure outlined below, in order to allow the engine to cool and prevent excessive temperatures in the turbocharger center housing, which could cause oil coking problems. |
- Before stopping the engine, allow the engine to run at low idle with no load for five minutes. This procedure allows the hot areas of the engine to cool gradually and this procedure will extend the life of the engine.
- Turn the engine start switch to the OFF position. Remove the key.
Show/hide table
 | |
| Illustration 1 | g00798790 |
- Be sure that all of the controls are in the OFF position. Be sure that all of the controls are in the proper position for parking the machine.
Caterpillar Information System:
TK1051 Track Feller Buncher Machine Systems Hydraulic System Troubleshooting
PF-300B and PS-300B Pneumatic Compactors Stopping the Machine
2001/04/02 A Hydraulic Oil Cooler with Increased Cooling Capacity is Available {1374}
2001/04/16 A New Valve Is Used to Control the Torque Converter Lockup Clutch {3139}
2001/04/02 Correction to Specifications , "Hydraulic System" {5102}
2001/04/09 A New Setting For The Counterweight Relief Valve Is Now Used {5408}
PF-300B and PS-300B Pneumatic Compactors Light Switches
PF-300B and PS-300B Pneumatic Compactors Mirror
TK1051 Track Feller Buncher Machine Systems Machine Preparation for Troubleshooting
416D, 420D, 424D, 428D, 430D, 432D, 438D and 442D Backhoe Loaders Power Train Differential and Pinion (Rear) - Install
2001/05/07 Explanation of the New Kickout Interlock Feature {5109}
247, 257, 267, 277 and 287 Multi Terrain Loaders and 216, 226, 228, 232, 236, 242, 246, 248, 252 and 262 Skid Steer Loaders Auxiliary Hydraulic Electronic Control System Sensors
533 and 543 Wheel Feller Bunchers Engine Air Filter Primary Element - Clean/Replace
PF-300B and PS-300B Pneumatic Compactors Leaving the Machine
PF-300B and PS-300B Pneumatic Compactors Shipping the Machine
816F Landfill Compactor, 815F Soil Compactor and 814F Wheel Dozer Stopping the Engine if an Electrical Malfunction Occurs
Comfort Series Seat For Caterpillar Machines Comfort Seat with Lumbar Option and Side Controls - Disassemble
TK1051 Track Feller Buncher Machine Systems Hydraulic System Pressure - Release
3126B Engines for 322C, 325C, and M325C Excavators and for the 325C Mobile Hydraulic Power Unit Low Engine Oil Pressure Lamp Circuit - Test
PF-300B and PS-300B Pneumatic Compactors Lifting and Tying Down the Machine
247, 257, 267, 277 and 287 Multi Terrain Loaders and 216, 226, 228, 232, 236, 242, 246, 248, 252 and 262 Skid Steer Loaders Auxiliary Hydraulic Electronic Control System MID 106 - CID 1189 - FMI 00
TK1051 Track Feller Buncher Machine Systems Hydraulic Oil Contamination - Test
735 Articulated Truck Tire Shipping Pressure
TK1051 Track Feller Buncher Machine Systems Hydraulic System Air - Purge