3524B and C175 Engines for Off-Highway Truck/Tractors Caterpillar


Air Inlet and Exhaust Lines

Usage:

797 5YW


Illustration 1g00774493


Illustration 2g00574190
Bolt tightening sequence

(1) Bolt

Tighten the bolts for the aftercooler according to the following procedure:

  1. Assemble seals to the aftercooler core.

  2. Temporarily secure the bottom seal with tape. Do not use an adhesive, a silicone lubricant, or any other lubricant for retention of the seal.

  3. Assemble the aftercooler with the seals to the inlet manifold.

  4. Inspect the bottom seal in order to ensure that the seating in the recess is correct.

  5. Install the aftercooler cover.

  6. Inspect the upper seal in order to ensure that the seating in the recess is correct.

  7. Install the cover bolts and hand tighten the bolts.

  8. Tighten the bolts according to the numerical sequence to the following torque.

    Torque for bolts ... 24 N·m (18 lb ft)

  9. Tighten the bolts again according to the numerical sequence to the following torque.

    Torque for bolts ... 47 N·m (35 lb ft)

  10. Remove the tape.

Caterpillar Information System:

Caterpillar<COMP-BREAK TAGNAME=cp850>©<COMP-RESUME> AP-900B andBarber-Greene<COMP-BREAK TAGNAME=cp850>©<COMP-RESUME> BG-240C Asphalt Pavers Hydraulic Oil Filter (Conveyor System Charge Pump) - Remove and Install
2001/02/26 A New Chaff Spreader is Available {6929}
Caterpillar<COMP-BREAK TAGNAME=cp850>©<COMP-RESUME> AP-900B andBarber-Greene<COMP-BREAK TAGNAME=cp850>©<COMP-RESUME> BG-240C Asphalt Pavers Differential Lock Valve - Assemble
938G Wheel Loader and IT38G Integrated Toolcarrier Steering System Articulated Hitch
325C Excavator Hydraulic System Pump Control (Negative Flow) - Adjust
416D, 420D, 424D, 428D, 430D, 432D, 438D and 442D Backhoe Loaders Machine Systems Backhoe Bucket Linkage - Remove and Install
Caterpillar<COMP-BREAK TAGNAME=cp850>©<COMP-RESUME> AP-900B andBarber-Greene<COMP-BREAK TAGNAME=cp850>©<COMP-RESUME> BG-240C Asphalt Pavers Differential Lock Valve - Disassemble
966G Wheel Loader and 972G Wheel Loader Power Train Variable Shift Control
416D, 420D, 424D, 428D, 430D, 432D, 438D and 442D Backhoe Loaders Machine Systems Backhoe Bucket Cylinder - Install
3500B Engines and 776D, 777D, 784C, 785C, 789C, 793C and 793D Off-Highway Truck/Tractors Turbocharger
322C Excavator Hydraulic System Pump Control (Negative Flow) - Test
216, 226, 232 and 242 Skid Steer Loaders Machine Systems Accumulator - Remove and Install
322C Excavator Hydraulic System Gear Pump (Pilot) - Test
5130, 5130B and 5230 Excavators, 784B, 785B, 785C, 789B, 789C, 793B and 793C Off-Highway Truck/Tractors and 992G, 994 and 994D Wheel Loaders Vital Information Management System (VIMS) CID 0838 FMI 02 Pressure Sensor (Left Front Suspension Cylinder) Incorrect Signal - Test
5130, 5130B and 5230 Excavators, 784B, 785B, 785C, 789B, 789C, 793B and 793C Off-Highway Truck/Tractors and 992G, 994 and 994D Wheel Loaders Vital Information Management System (VIMS) CID 0838 FMI 03 Pressure Sensor (Left Front Suspension Cylinder) Voltage Above Normal - Test
5130, 5130B and 5230 Excavators, 784B, 785B, 785C, 789B, 789C, 793B and 793C Off-Highway Truck/Tractors and 992G, 994 and 994D Wheel Loaders Vital Information Management System (VIMS) CID 0838 FMI 04 Pressure Sensor (Left Front Suspension Cylinder) Voltage Below Normal - Test
5130, 5130B and 5230 Excavators, 784B, 785B, 785C, 789B, 789C, 793B and 793C Off-Highway Truck/Tractors and 992G, 994 and 994D Wheel Loaders Vital Information Management System (VIMS) CID 0838 FMI 06 Pressure Sensor (Left Front Suspension Cylinder) Current Above Normal - Test
5130, 5130B and 5230 Excavators, 784B, 785B, 785C, 789B, 789C, 793B and 793C Off-Highway Truck/Tractors and 992G, 994 and 994D Wheel Loaders Vital Information Management System (VIMS) CID 0838 FMI 08 Pressure Sensor (Left Front Suspension Cylinder) Abnormal Signal - Test
5130, 5130B and 5230 Excavators, 784B, 785B, 785C, 789B, 789C, 793B and 793C Off-Highway Truck/Tractors and 992G, 994 and 994D Wheel Loaders Vital Information Management System (VIMS) CID 0839 FMI 02 Pressure Sensor (Right Front Suspension Cylinder) Incorrect Signal - Test
5130, 5130B and 5230 Excavators, 784B, 785B, 785C, 789B, 789C, 793B and 793C Off-Highway Truck/Tractors and 992G, 994 and 994D Wheel Loaders Vital Information Management System (VIMS) CID 0839 FMI 03 Pressure Sensor (Right Front Suspension Cylinder) Voltage Above Normal - Test
5130, 5130B and 5230 Excavators, 784B, 785B, 785C, 789B, 789C, 793B and 793C Off-Highway Truck/Tractors and 992G, 994 and 994D Wheel Loaders Vital Information Management System (VIMS) CID 0839 FMI 04 Pressure Sensor (Right Front Suspension Cylinder) Voltage Below Normal - Test
5130, 5130B and 5230 Excavators, 784B, 785B, 785C, 789B, 789C, 793B and 793C Off-Highway Truck/Tractors and 992G, 994 and 994D Wheel Loaders Vital Information Management System (VIMS) CID 0839 FMI 06 Pressure Sensor (Right Front Suspension Cylinder) Current Above Normal - Test
5130, 5130B and 5230 Excavators, 784B, 785B, 785C, 789B, 789C, 793B and 793C Off-Highway Truck/Tractors and 992G, 994 and 994D Wheel Loaders Vital Information Management System (VIMS) CID 0839 FMI 08 Pressure Sensor (Right Front Suspension Cylinder) Abnormal Signal - Test
5130, 5130B and 5230 Excavators, 784B, 785B, 785C, 789B, 789C, 793B and 793C Off-Highway Truck/Tractors and 992G, 994 and 994D Wheel Loaders Vital Information Management System (VIMS) CID 0840 FMI 02 Pressure Sensor (Left Rear Suspension Cylinder) Voltage Above Normal - Test
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.