Correction to Testing and Adjusting for the Test of the Torque Limiter {5070}
- Backhoe Loader:
- 416C (S/N: 1WR1-UP; 1XR1-UP; 4ZN1-UP; 5YN1-UP)
- 426C (S/N: 1CR1-UP; 1ER1-UP; 1MR1-UP; 1NR1-UP; 1YR1-UP; 1ZR1-UP; 6XN1-UP; 7WN1-UP)
- 428C (S/N: 2CR1-UP; 8RN1-UP)
- 436C (S/N: 1FR1-UP; 1GR1-UP; 1PR1-UP; 1RR1-UP; 2AR1-UP; 2BR1-UP; 8TN1-UP; 9JN1-UP)
- 438C (S/N: 1JR1-UP; 1TR1-UP; 2DR1-UP; 9KN1-UP)
Replace Table 20.
Show/hide table
Required Parts     | ||
Qty     | Part Number     | Description     |
1     | 6V-8557     | Face Seal Nut     |
2     | 8C-3417     | Elbow     |
1     | 6V-9832     | Cap Assembly     |
1     | 6V-8945     | O-Ring Reducer     |
1     | 4C-9910     | Flow Meter     |
1     | 6V-8946     | Reducer Assembly     |
1     | 6V-9832     | Cap Assembly     |
1     | 1U-5796     | Pressure Differential Gauge Group     |
4     | 6V-4143     | Coupler Assembly     |
2     | 6V-3014     | Hose Assembly     |
1     | 8T-0855     | Pressure Gauge     |
1     | 8T-0860     | Pressure Gauge     |
Replace the following steps and tables.
Test and Adjustment to the Torque Limiter
Show/hide table
Illustration 1 | g00556134 |
(5) Tap for the System Pressure |
The tap (5) provides the system pressure of the hydraulic pump. Access is obtained from the bottom of the machine or by removing the floorplate.
- Install one 8T-0860 Pressure Gauge with a range of 0 to 40000 kPa (0 to 5800 psi) and 6V-3014 Hose Assembly to pump pressure tap (5) .
- Install one 8C-3417 Elbow into each port in 4C-9910 Flow Meter. Attach one 6V-8946 Reducer Assembly onto one 8C-3417 Elbow. Install a 6V-8557 Face Seal Nut and a 6V-8945 O-Ring Reducer onto the 8C-3417 Elbow at the inlet of the flow meter.
- Install the end of the hose (6) onto the 6V-8945 O-Ring Reducer and the 6V-8557 Face Seal Nut at the inlet of the flow meter that was installed in step 8.
Show/hide table
Illustration 2 | g00789845 |
(3) Elbow for the cylinder head end (4) Hose for the head end (5) Tube for the rod end (6) rod end hose (7) bolts (8) retainers |
- For machines that are equipped with turbocharged engines, Table 21 shows the correct pressure and the correct flow for the pump.
Show/hide table
Table 21 PUMP PRESSURE     FLOW    
18000 kPa (2600 psi)    
120 to 130 L/min (31 to 35 US gpm)    
- For machines that are equipped with naturally aspirated engines, Table 22 shows the correct pressure and the correct flow for the pump.
Show/hide table
Table 22 PUMP PRESSURE     FLOW    
18000 kPa (2600 psi)    
100 to 120 L/min (26 to 31 US gpm)    
Caterpillar Information System:
725 and 730 Articulated Trucks Machine Systems Check and Pressure Reducing Valve (Brake Accumulator) - Install
312C, 315C, 318C, 319C, 320C, 321C, 322C, 325C, 330C and M325C Excavators and 325C MHPU and 330C MHPU Mobile Hydraulic Power Units Engine and Pump Control - V2 Backup System
2001/05/14 An Improved Selector Fork and a New Pressure Control Valve for the Interaxle Differential Lock is now Installed {3074, 3159}
725 and 730 Articulated Trucks Machine Systems Check and Pressure Reducing Valve (Brake Accumulator) - Remove
Caterpillar<COMP-BREAK TAGNAME=cp850>©<COMP-RESUME> AP-900B and Barber-Greene<COMP-BREAK TAGNAME=cp850>©<COMP-RESUME> BG-240C Asphalt Pavers 3116 Engine Supplement Fuel Filter (Secondary) and Fuel Filter Base - Remove and Install
826G Landfill Compactor, 825G Soil Compactor, 824G Wheel Dozer and 980G Wheel Loader Power Train Electronic Control System MID 081 - CID 0168 - FMI 01
826G Landfill Compactor, 825G Soil Compactor, 824G Wheel Dozer and 980G Wheel Loader Power Train Electronic Control System MID 081 - CID 0168 - FMI 00
416D, 420D, 424D, 428D, 430D, 432D, 438D and 442D Backhoe Loaders Machine Systems Bank Valve (Backhoe) - Remove
216, 226, 232 and 242 Skid Steer Loaders Machine Systems Gear Pump - Remove
2001/02/19 The Booklet, SENR9620, "Improving Fuel System Durability" Is Available {1250}
793B Off-Highway Truck Hydraulic System Relief Valve (Hoist) - Test and Adjust
Caterpillar<COMP-BREAK TAGNAME=cp850>©<COMP-RESUME> AP-900B and Barber-Greene<COMP-BREAK TAGNAME=cp850>©<COMP-RESUME> BG-240C Asphalt Pavers 3116 Engine Supplement Engine - Remove
3306B-XQ200 Rental Generator Set Engine Enclosure - Inspect
2002/01/28 Improved Coolant Flow Switches Are Available {1438}
2001/02/19 Service Parts are Available for the Manifold for the Ejector Cylinder and the Tailgate {5264}
2003/10/13 New Transmission Gear Position Sensor Available for Off Highway Trucks, Wheel Tractor Scrapers, and Articulated Trucks {1408, 3061}
Caterpillar<COMP-BREAK TAGNAME=cp850>©<COMP-RESUME> AP-900B andBarber-Greene<COMP-BREAK TAGNAME=cp850>©<COMP-RESUME> BG-240C Asphalt Pavers Gear Motor (Ventilation System) - Disassemble
216, 226, 232 and 242 Skid Steer Loaders Machine Systems Gear Pump - Install
Caterpillar<COMP-BREAK TAGNAME=cp850>©<COMP-RESUME> AP-900B and Barber-Greene<COMP-BREAK TAGNAME=cp850>©<COMP-RESUME> BG-240C Asphalt Pavers 3116 Engine Supplement Radiator - Remove and Install
TH103 Telehandler Capacities (Refill)
C-9 Engines for Caterpillar Built Machines General Information
826G Landfill Compactor, 825G Soil Compactor, 824G Wheel Dozer and 980G Wheel Loader Power Train Electronic Control System MID 081 - CID 0190 - FMI 01
CP-663E, CS-663E and CS-683E Paving Compactors Machine Systems Gear Pump (Steering)
725, 730, 735, 740 and 740 EJECTOR Articulated Trucks Power Train Electronic Control System Retarder - Calibrate - Using the Caterpillar Electronic Technician