236, 246, 248, 252 and 262 Skid Steer Loaders Engine Supplement Caterpillar

Removal Procedure

236 and 252 Skid Steer Loader

1. Lower the work tool to the ground.

2. Turn the engine start switch to the OFF position.

3. Open the engine access door.

4. Release the latch on the radiator. Raise the radiator. This will allow access to the muffler.

   Note: Do not attempt to service the muffler until the engine is cool to the touch.

   Note: The 236 and 252 are not equipped with a turbocharger.

Show/hide table



Illustration 1	g00594699

5. Remove three bolts (1). Remove washers and the gasket.

   Note: The gasket may be attached to the exhaust manifold.

6. Disconnect exhaust elbow (2) from exhaust manifold (3) .

Show/hide table



Illustration 2	g00594714

7. Remove four bolts and four washers (4). Remove muffler (5) from the machine.

Show/hide table



Illustration 3	g00594720

8. Remove clamp (6). Separate exhaust elbow (2) from muffler (5) .

Removal Procedure

246, 248 and 262 Skid Steer Loader

1. Lower the work tool to the ground.

2. Turn the engine start switch to the OFF position.

3. Open the engine access door.

4. Release the latch on the radiator. Raise the radiator. This will allow access to the muffler.

   Note: Do not attempt to service the muffler until the engine is cool to the touch.

   Note: The 246, 248 and 262 are equipped with a turbocharger.

Show/hide table



Illustration 4	g00768654

5. Remove three bolts (1). Remove the washers and the gasket.

   Note: The gasket may be attached to the turbocharger.

6. Disconnect exhaust elbow (2) from turbocharger (3) .

Show/hide table



Illustration 5	g00768658

7. Remove four bolts and four washers (4). Remove muffler (5) from the machine.

Show/hide table



Illustration 6	g00768703

8. Remove clamp (6). Separate exhaust elbow (2) from muffler (5) .

Installation Procedure

236 and 252 Skid Steer Loader

Show/hide table



Illustration 7	g00594720

1. Install clamp (6) in order to secure exhaust elbow (2) to muffler (5) .

Show/hide table



Illustration 8	g00594714

2. Place muffler (5) in position. Install four bolts and four washers (4) in order to secure muffler (5) to the machine.

Show/hide table



Illustration 9	g00594699

3. Align exhaust elbow (2) to exhaust manifold (3). Apply 5P-3931 Anti-Seize Compound to three bolts (1). Install the gasket and install three bolts and three washers (1) in order to secure exhaust elbow (2) to the exhaust manifold (3) .

4. Start the engine and check for exhaust leaks.

5. Turn the engine to the OFF position. Lower the radiator and lock the radiator into position.

6. Close the engine access door.

Installation Procedure

246, 248 and 262 Skid Steer Loader

Show/hide table



Illustration 10	g00768703

1. Install clamp (6) in order to secure exhaust elbow (2) to muffler (5) .

Show/hide table



Illustration 11	g00768658

2. Place muffler (5) in position. Install four bolts and four washers (4) in order to secure muffler (5) to the machine.

Show/hide table



Illustration 12	g00768654

3. Align exhaust elbow (2) to turbocharger (3). Apply 5P-3931 Anti-Seize Compound to three bolts (1). Install the gasket and install three bolts and three washers (1) in order to secure exhaust elbow (2) to the turbocharger (3) .

4. Start the engine and check for exhaust leaks.

5. Turn the engine to the OFF position. Lower the radiator and lock the radiator into position.

6. Close the engine access door.