416D, 420D, 424D, 428D, 432D and 442D Backhoe Loaders Transmission (Autoshift) Caterpillar


Operational Checks

Usage:

416D BGJ

------ WARNING! ------

机器的突然动作或在压力下放油,可能对机器上或机器附近人员造成伤害。 为避免可能造成的伤害,在进行测试前执行以下步骤。


  1. 起动发动机。

  1. 降低稳定器并将后轮提离地面 150 mm (6 in)。

  1. 使用铲斗液压控制装置将铲斗降至地面,并使用铲斗将前轮提离地面 150 mm (6 in)。

  1. 发动机转速需要处于低怠速。

  1. 发动机运行并且已接合制动器的同时,移动前进档/倒档换向操纵杆和变速箱速度操纵杆。

  1. 朝每个方向并以所有档位运行机器。 注意异常噪音,然后找出噪音源。 如果操作不正确,请参考操作期间的检查表,以了解故障和可能的原因。

  1. 将机器降至地面上。

  1. 以低怠速运转发动机。 接合停车制动器。 停止发动机。

Caterpillar Information System:

3456 Engine, 836G Landfill Compactor, 834G Wheel Dozer and 988G Wheel Loader Flash Programming
416D, 420D, 424D, 428D, 432D and 442D Backhoe Loaders Transmission (Autoshift) Visual Inspection
725, 730, 735, 740 and 740 EJECTOR Articulated Trucks Power Train Electronic Control System MID 027 - CID 0144 - FMI 06
938G Wheel Loader and IT38G Integrated Toolcarrier Hydraulic System Piston Motor (On Demand Fan)
416D, 420D, 424D, 428D, 430D, 432D, 438D and 442D Backhoe Loaders Transmission (Direct Drive) Machine Preparation for Troubleshooting
725, 730, 735, 740 and 740 EJECTOR Articulated Trucks Power Train Electronic Control System MID 027 - CID 0144 - FMI 03
950G and 962G Wheel Loaders and IT62G Integrated Toolcarrier Machine Systems Main Control Valve and Mounting Plate - Remove
416D, 420D, 424D, 428D, 430D, 432D, 438D and 442D Backhoe Loaders Machine Systems Bank Valve (Stabilizer) - Assemble
2001/01/22 Correction to the Allowable Oil Viscosity on the Driveline {3258, 4011, 4051, 7581}
725, 730, 735, 740 and 740 EJECTOR Articulated Trucks Power Train Electronic Control System MID 027 - CID 0041 - FMI 04
420D, 430D, 432D and 442D Backhoe Loaders Auxiliary Hydraulic Electronic Control System MID 106 - CID 1529 - FMI 02
2000/11/01 Revised Coolant Recommendations For Gas Engines {1350, 1352, 1395}
CB22, CB24, CB32 and CC24 Vibratory Compactor Water Separator (Fuel Priming Pump and Primary Fuel Filter) - Disassemble
CB22, CB24, CB32 and CC24 Vibratory Compactor Water Separator (Fuel Priming Pump and Primary Fuel Filter) - Assemble
Assembly Procedures for the 776D Tractors and for the 777D Off-Highway Trucks{7000, 7960} Assembly Procedures for the 776D Tractors and for the 777D Off-Highway Trucks{7000, 7960}
3456 Engine, 836G Landfill Compactor, 834G Wheel Dozer and 988G Wheel Loader ATA (SAE J1587 / J1708) Data Link Circuit - Test
725, 730, 735, 740 and 740 EJECTOR Articulated Trucks Power Train Electronic Control System MID 027 - CID 0168 - FMI 01
446B Backhoe Loader Transmission (Autoshift) Power Train Troubleshooting
420D, 430D, 432D and 442D Backhoe Loaders Auxiliary Hydraulic Electronic Control System MID 106 - CID 1189 - FMI 00
725, 730, 735, 740 and 740 EJECTOR Articulated Trucks Power Train Electronic Control System MID 027 - CID 0177 - FMI 03
561M Pipelayer Counterweight Cylinder - Install
2000/12/04 Electronic Control Modules and Computer Viruses {7610}
725, 730 and 730 EJECTOR Articulated Trucks Power Train Tire and Rim - Remove
725, 730 and 730 EJECTOR Articulated Trucks Power Train Tire and Rim - Install
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.