Rocker Shaft - Disassemble
拆解步骤
Show/hide table
| 所需工具 | |||
| 工具 | 零件号 | 零件描述 | 数量 |
| A | 6V-0083 | 金刚砂抛光纸 | 1 |
开始:
- 拆下摇臂轴组件和推杆。 请参阅拆解和组装, "摇臂轴和推杆 - 拆卸"。
Show/hide table
| 注意 |
|---|
保持所有零件清洁无杂质。 杂质会造成快速磨损和缩短部件寿命。 |
注: 有关摇臂轴部件的可再用性信息，请参阅再使用零件和修补操作指南, SEBF8267, "3114 和 3116 发动机的摇臂和摇臂轴"。
- 从摇臂轴组件 (4) 上拆下支架 (1) 。
Show/hide table
 | |
| 图 1 | g00629612 |
- 从摇臂轴组件 (4) 上拆下气门摇臂 (2) 和单体喷油器摇臂 (3) 。
注: 不要从摇臂轴组件推动摇臂。 如有必要，用一片工具 (A) 轻轻擦亮轴的表面以辅助拆卸。
- 检查气门摇臂 (2) 和单体喷油器摇臂 (3) 上的调整螺钉有无损坏。
- 检查摇臂轴组件 (4) 有无擦伤和裂纹。
- 检查单体喷油器摇臂 (3) 上的轴承 (5) 。 摇臂上的孔径为 24.808 ± 0.20 mm (0.9767 ± 0.0079 in)。 请参阅技术规格, "气门摇臂和挺杆"。 如有必要，更换轴承。
Show/hide table
 | |
| 图 2 | g00630277 |
- 确保单体喷油器摇臂 (3) 上的按钮 (6) 没有损坏。 还要确保按钮 (6) 的挡圈就位。
Caterpillar Information System:
AP-1050B and BG-245C Asphalt Pavers Propel Electronic Control Module
416D, 420D, 424D, 428D, 430D, 432D, 438D and 442D Backhoe Loaders Hydraulic and Steering System Hydraulic Pump - Test and Adjust
Caterpillar<COMP-BREAK TAGNAME=cp850>©<COMP-RESUME> AP-1050B andBarber-Greene<COMP-BREAK TAGNAME=cp850>©<COMP-RESUME> BG-245C Asphalt Pavers Propel System Piston Motor (Propel)
Caterpillar Monitoring System MID 030 - CID 0100 - FMI 08
Caterpillar Monitoring System MID 030 - CID 0096 - FMI 08
2000/10/02 Improved Lower Lift Arm Bearings are Available {6107}
2000/10/02 A Gas Spring for the Hood is Available {7251}
2000/10/02 Installation of Larger Lower Lift Arm Bearings Improves Bucket Pin and Bearing Service Life {6107}
2000/10/02 An Improved 152-8346 Solenoid Valve Group is Available {5479}
2000/10/02 An Improved 152-8339 Solenoid Valve Group is Available {5479}
3114, 3116, and 3126 Engines for Caterpillar Built Machines Governor - Remove
3456 Engine, 836G Landfill Compactor, 834G Wheel Dozer and 988G Wheel Loader Injector Solenoid Circuit - Test
3406E and 3456 Engines for Caterpillar Built Machines Piston and Rings
Caterpillar<COMP-BREAK TAGNAME=cp850>©<COMP-RESUME> AP-1050B andBarber-Greene<COMP-BREAK TAGNAME=cp850>©<COMP-RESUME> BG-245C Asphalt Pavers Propel System Final Drive Planetary
Caterpillar<COMP-BREAK TAGNAME=cp850>©<COMP-RESUME> AP-1050B andBarber-Greene<COMP-BREAK TAGNAME=cp850>©<COMP-RESUME> BG-245C Asphalt Pavers Propel System Propel Hydraulic System
725 and 730 Articulated Trucks Steering, Suspension, and Body Hoist Hydraulic Systems Hoist System
RM-250C Reclaimer Mixer Rotor Elevation
HH45 Harvester Head, HH55 Harvester Head, HH65 Harvester Head and HH75 Harvester Head Operation
2000/10/16 New Ballstuds and New Races are Used To Improve Service Life {4303, 4305}
RM-250C Reclaimer Mixer Operating Technique Information
836G Landfill Compactor and 834G Wheel Dozer Power Train Steering Frame Lock - Separate and Connect
247, 257, 267, 277 and 287 Multi Terrain Loaders and 216, 226, 228, 232, 236, 242, 246, 248, 252 and 262 Skid Steer Loaders Auxiliary Hydraulic Electronic Control System Switch (Continuous Flow)
AP-1050B and BG-245C Asphalt Pavers Conveyor Electronic Control Module
Improved Seal in Torque Converter {3101} Improved Seal in Torque Converter {3101}