IT62G Series II Integrated Toolcarrier Caterpillar

Display Modules (Caterpillar Monitoring System)

Usage:

Show/hide table




Illustration 1	g00737938

(1) This gauge indicates several machine parameters. The gauge indicates the speed of the engine, the speed of the machine, and the gear speed of the transmission.

(2) This gauge indicates excessive coolant temperature. If the gauge needle is in the red area, stop the machine and investigate the cause of the fault.

(3) The gauge indicates excessive transmission oil temperature. If the gauge needle is in the red area, reduce the load on the machine. If the gauge needle is in the red area and the action light continues to flash after approximately five minutes, stop the machine and investigate the cause of the fault.

(4) The gauge indicates excessive hydraulic oil temperature. If the gauge needle is in the red area, reduce the load on the system. If the gauge needle remains in the red area, stop the machine and investigate the cause of the fault.

(5) The gauge indicates the fuel level that is remaining in the fuel tank. When the gauge reaches the red area, refuel as soon as possible.

Caterpillar Information System:

TH62, TH63, TH82, TH83 and TH103 Telehandlers Machine Systems Cab - Remove

TH62, TH63, TH82 and TH83 Telehandlers Hydraulic System Tilt System

TH62, TH63, TH82 and TH83 Telehandlers Hydraulic System Boom Hydraulic System

TH62, TH63, TH82 and TH83 Telehandlers Hydraulic System Main Hydraulic System

TH62, TH63, TH82 and TH83 Telehandlers Hydraulic System General Information

725 and 730 Articulated Trucks Radiator Core - Clean

TH62, TH63, TH82, TH83 and TH103 Telehandlers Machine Systems Tilt Cylinder - Remove and Install

C-9 Engines for Caterpillar Built Machines Flywheel

2000/10/09 An Adjustment Procedure for the King Post Bearing is Now Used {6307}

311B, 312B, 315B, 318B, 320B, 322B, 325B, 330B, 345B, 345B Series II, 365B and 385B Excavators Air Conditioning and Heating Blower Motor

Caterpillar<COMP-BREAK TAGNAME=cp850>©<COMP-RESUME> AP-1050B andBarber-Greene<COMP-BREAK TAGNAME=cp850>©<COMP-RESUME> BG-245C Asphalt Pavers Propel System Center and Front Bogies

IT62G Series II Integrated Toolcarrier Air Inlet Heater Starting Aid - If Equipped

2000/09/11 A New Wiring Harness Is Available {1408}

797 Off-Highway Truck Power Train Axle Shaft - Remove

TH62, TH63, TH82 and TH83 Telehandlers Steering System Steering System

Payload Control System (PCS) 2.X Service Tools

Caterpillar<COMP-BREAK TAGNAME=cp850>©<COMP-RESUME> AP-1050B andBarber-Greene<COMP-BREAK TAGNAME=cp850>©<COMP-RESUME> BG-245C Asphalt Pavers Propel System Pressure Limiter Valve - Test and Adjust

Caterpillar<COMP-BREAK TAGNAME=cp850>©<COMP-RESUME> AP-1050B andBarber-Greene<COMP-BREAK TAGNAME=cp850>©<COMP-RESUME> BG-245C Asphalt Pavers Propel System Relief Valve (Charge) - Test and Adjust

IT62G Series II Integrated Toolcarrier Functional Test (Caterpillar Monitoring System)

Caterpillar<COMP-BREAK TAGNAME=cp850>©<COMP-RESUME> AP-1050B andBarber-Greene<COMP-BREAK TAGNAME=cp850>©<COMP-RESUME> BG-245C Asphalt Pavers Propel System Piston Pump Neutral - Test and Adjust

416D, 420D, 424D, 428D, 430D, 432D, 438D and 442D Backhoe Loaders Axles, Differential and Brakes Visual Inspection

IT62G Series II Integrated Toolcarrier Warning Categories (Caterpillar Monitoring System)

C-9 Engines for Caterpillar Built Machines Cylinder Block Cover Group

725 and 730 Articulated Trucks Rollover Protective Structure (ROPS) - Inspect