416D, 420D, 424D, 428D, 430D, 432D and 442D Backhoe Loaders Caterpillar


Backhoe Three Lever with Foot Swing Control

Usage:

416D B2D
Catatan: Sewaktu mengoperasikan alat kontrol kaki tiga tuas untuk gerak swing, jangan berdiri pada pedal atau jangan memberikan tekanan yang berlebihan pada pedal.


Ilustrasi 1g00732995


Bucket Membuang (1) - Gerakkan tuas ke posisi ini untuk mengosongkan bucket.

Tahan (2) - Gerakkan tuas ke posisi ini untuk menghentikan gerakan bucket. Saat tuas dilepaskan dari sembarang posisi, tuas akan kembali ke posisi TAHAN.


Bucket Memuat (3) - Gerakkan tuas ke posisi ini untuk melakukan pengisian bucket.


Stick Keluar (4) - Gerakkan tuas ke posisi ini untuk menggerakkan stick ke arah luar.

Tahan (5) - Gerakkan tuas ke posisi ini untuk menghentikan gerakan stick. Lepaskan tuas. Tuas akan kembali ke posisi TAHAN.


Stick Masuk (6) - Gerakkan tuas ke posisi ini untuk menggerakkan stick ke arah dalam.



Ilustrasi 2g00732998


Boom Turun (7) - Gerakkan tuas ke posisi ini untuk menurunkan boom.

Tahan (8) - Gerakkan tuas ke posisi ini untuk menghentikan gerakan boom. Lepaskan tuas. Tuas akan kembali ke posisi TAHAN.


Boom Naik (9) - Gerakkan tuas ke posisi ini untuk mengangkat boom.


Swing Kiri (10) - Tekan ujung depan pedal kiri untuk melakukan gerak swing boom ke kiri. Lepaskan pedal untuk menghentikan gerakan.


Swing Kanan (11) - Tekan ujung depan pedal kanan untuk melakukan gerak swing boom ke kanan. Lepaskan pedal untuk menghentikan gerakan.

Caterpillar Information System:

416D, 420D, 424D, 428D, 430D, 432D and 442D Backhoe Loaders Backhoe Three Lever with Auxiliary Lever Control
IT38G Integrated Toolcarrier and 938G Wheel Loader Power Train Differential and Bevel Gear - Remove
TH62, TH63, TH82 and TH83 Telehandlers Braking System Visual Inspection
561N, 572R Series II and 572R Pipelayers and D10R, D11R, D5M, D5N, D6M, D6N, D6R, D6R Series II, D7R, D7R Series II and D8R Series II Track-Type Tractors Power Train Electronic Control System MID 113 - CID 0676 - FMI 08
416D Backhoe Loader Rollover Protective Structure (ROPS) - Inspect
TH103 Telehandler Power Train Axle Housing and Bearing Preload - Adjust
IT28G and IT38G Integrated Toolcarriers and 924G, 924GZ, 928G and 938G Wheel Loaders Power Train Electronic Control System MID 081 - CID 0683 - FMI 03
797 Off-Highway Truck Braking System Piston Pump (Brake Cooling Motor Drive)
IT28G and IT38G Integrated Toolcarriers and 924G, 924GZ, 928G and 938G Wheel Loaders Power Train Electronic Control System MID 081 - CID 0646 - FMI 06
IT28G and IT38G Integrated Toolcarriers and 924G, 924GZ, 928G and 938G Wheel Loaders Power Train Electronic Control System MID 081 - CID 0645 - FMI 06
IT28G and IT38G Integrated Toolcarriers and 924G, 924GZ, 928G and 938G Wheel Loaders Power Train Electronic Control System MID 081 - CID 0644 - FMI 06
IT28G and IT38G Integrated Toolcarriers and 924G, 924GZ, 928G and 938G Wheel Loaders Power Train Electronic Control System MID 081 - CID 0643 - FMI 06
424D, 428D and 438D Backhoe Loaders Two Lever Control (Backhoe)(Excavator Pattern)
TH62, TH63, TH82 and TH83 Telehandlers Braking System Operation Checks
416D Backhoe Loader Steering Column Tilt Control
416D Backhoe Loader Steering Control
416D Backhoe Loader Differential Lock Control - If Equipped
416D Backhoe Loader All Wheel Drive Control - If Equipped
416D Backhoe Loader Ride Control - If Equipped
HH45 Harvester Head, HH55 Harvester Head, HH65 Harvester Head and HH75 Harvester Head Removing the Hydraulic Control Valve Cover
TH62, TH63, TH82, TH83 and TH103 Telehandlers Power Train Final Drive and Wheel - Install
TH62, TH63, TH82 and TH83 Telehandlers Braking System Braking System Troubleshooting
3126B Engines for Caterpillar Built Machines Electronic Control Module - Remove and Install
561N, 572R Series II and 572R Pipelayers and D10R, D11R, D5M, D5N, D6M, D6N, D6R, D6R Series II, D7R, D7R Series II and D8R Series II Track-Type Tractors Power Train Electronic Control System MID 113 - CID 0677 - FMI 08
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.