Correction to Systems Operation , "Cross Axle Lock Selector Switch" {1435, 7332}
- Articulated Truck:
- D250E Series II (PIN: 4PS1-UP)
- D300E Series II (PIN: 5KS1-UP)
- D350E Series II (PIN: 2XW1-UP)
- D400E Series II (PIN: 8PS1-UP)
- D400E Series II Ejector (PIN: APF1-UP)
The selector switch is used to determine if the locks should be engaged. The cross axle lock will disengage if the machine speed reaches 10 mph. The cross axle lock will NOT engage until the machine speed is below 10 mph.
Note: The interaxle differential will remain engaged on the D350E Series II Articulated Trucks above 10 mph. The cross axle lock will disengage if the machine speed reaches 10 mph.
Caterpillar Information System:
2000/08/14 Correction To Installation Procedure for Wheel Bearings and Duo-Cone Seals {4208, 7561}
2000/10/23 Seal Kits for Hydraulic Cylinders {7555}
HH45 Harvester Head, HH55 Harvester Head, HH65 Harvester Head and HH75 Harvester Head Lubricant Viscosities
3176C, 3196 and 3406E Engines for 725, 730, 735, 740, and 740 Ejector Articulated Trucks E017 High Engine Coolant Temperature Warning
Machine Security System Glossary of Terms
TH103 Telehandler Power Train Torque Converter Troubleshooting
TH103 Telehandler Power Train Transmission Troubleshooting
3126B Engine for Caterpillar Built Machines Unit Injector Hydraulic Pump
776D and 777D Off-Highway Truck/Tractors Electronic Systems Guide Related Components
Road Analysis Control (RAC) For Off-Highway Truck/Tractors Locating the Adverse Section of Road
3176C, 3196 and 3406E Engines for 725, 730, 735, 740, and 740 Ejector Articulated Trucks Engine Overspeeds on Start-up
TH62, TH63, TH82, TH83 and TH103 Telehandlers Power Train Final Drive and Wheel - Remove
Machine Security System Service Tools
416D Backhoe Loader Engine Start Switch
Machine Security System Operation of Status Indicator
2001/04/16 Serviceable Parts Are Now Available for the Oscillation Lock Cylinder {7080}
TH62, TH63, TH82 and TH83 Telehandlers Braking System Brake Cylinder (Master)
Machine Security System Protected Functions
Road Analysis Control (RAC) For Off-Highway Truck/Tractors Road Repair Considerations
3500 Generator Set Engines Indicators for Engine Oil Pressure
IT28G and IT38G Integrated Toolcarriers and 924G, 924GZ, 928G and 938G Wheel Loaders Power Train Electronic Control System MID 081 - CID 0168 - FMI 01
2000/08/07 Disposal of the Mobil-Trac System Belt {4198}
3126B Engines for Caterpillar Built Machines Air Inlet Elbow - Remove and Install
416D Backhoe Loader Drive Shaft Spline - Lubricate