MID 113 - CID 0254 - FMI 13
Conditions Which Generate This Code:
This diagnostic code is for the Power Train ECM.
This diagnostic code is recorded when the ECM determines that calibration procedures have not been performed.
Test Step 1. PERFORM THE CALIBRATIONS.
- Proceed to Testing and Adjusting, "Calibration". Perform all calibrations.
Expected Result:
Once calibrations have been performed, the diagnostic code will disappear.
Results:
- OK - The diagnostic code disappeared. Resume normal machine operation.
STOP
- NOT OK - The diagnostic code did not disappear.
Repair: The calibrations were not performed correctly. Perform the calibrations again.
STOP
Caterpillar Information System:
JF Series Starting Motor Starting Motor
D400E Series II Articulated Truck Steering, Suspension, and Ejector Body Hydraulic Systems Ejector Control Valve - Test
834G Wheel Tractor and 836G Landfill Compactor Electrohydraulic System Solenoid Valves
834G Wheel Tractor and 836G Landfill Compactor Electrohydraulic System Switches
561N, 572R Series II and 572R Pipelayers and D10R, D11R, D5M, D5N, D6M, D6N, D6R, D6R Series II, D7R, D7R Series II and D8R Series II Track-Type Tractors Power Train Electronic Control System MID 113 - CID 0254 - FMI 12
834G Wheel Tractor and 836G Landfill Compactor Electrohydraulic System Sensors
834G Wheel Tractor and 836G Landfill Compactor Electrohydraulic System Cat Data Link
950F Wheel Loader and 950F Series II Wheel Loader Hydraulic System Monitoring System (Hydraulic Functions)
834G Wheel Tractor and 836G Landfill Compactor Electrohydraulic System Electronic Control Module (Implement)
776D, 777D and 777D HAA Off-Highway Truck/Tractors Air System and Brakes Air System
HF181, HF201 and HF221 Felling Heads for Track Feller Bunchers Operating Technique Information
2000/07/10 Dimensions for Pin Bores in Special Instruction, REHS0276 are Now Updated {3260, 3269, 6116, 6118, 6119, 6125, 6126, 6127, 7057, 7069, 7100}
HF181, HF201 and HF221 Felling Heads Bearing (Side Tilt) - Lubricate
561N, 572R Series II and 572R Pipelayers and D10R, D11R, D5M, D5N, D6M, D6N, D6R, D6R Series II, D7R, D7R Series II and D8R Series II Track-Type Tractors Power Train Electronic Control System MID 113 - CID 0269 - FMI 03
938G Wheel Loader and IT38G Integrated Toolcarrier Machine Systems Fuel Level Sender
561N, 572R Series II and 572R Pipelayers and D10R, D11R, D5M, D5N, D6M, D6N, D6R, D6R Series II, D7R, D7R Series II and D8R Series II Track-Type Tractors Power Train Electronic Control System MID 113 - CID 0269 - FMI 04
D400E Series II Articulated Truck Steering, Suspension, and Ejector Body Hydraulic Systems Tailgate Cylinder - Test
HF181, HF201 and HF221 Felling Heads for Track Feller Bunchers Bearing for Accumulator Arm - Lubricate
PF-300B and PS-300B Pneumatic Compactors Propel System Transmission
HF181, HF201 and HF221 Felling Heads for Track Feller Bunchers Bearing for Grapple Arm - Lubricate
HF181, HF201 and HF221 Felling Heads Bearings (Cylinder Ends) - Lubricate
8-16B, 10-20B and 10-20WB Extend-A-Mat<COMP-BREAK TAGNAME=cp850>©<COMP-RESUME> Screed Specifications
2000/07/24 Correction to Disassembly and Assembly , SENR4091 for the Differential {3258}
D400E Series II Articulated Truck Steering, Suspension, and Ejector Body Hydraulic Systems Suspension Height (Front) - Check and Adjust