Equipment Lowering with Engine Stopped
- Move the boom switch to the OFF position.
- Turn the engine start switch to the ON position.
- Move the boom switch to the ON position.
- Use the joystick or the switches to lower the machine fully.
- Push the right hand control forward in order to lower the work tool to the ground.
Note: The accumulator only maintains sufficient pressure for lowering the work tool for approximately 1.5 minutes after the engine stops. The work tool cannot be lowered by this method after this time limit.
Caterpillar Information System:
776D, 777D and 777D HAA Off-Highway Truck/Tractors Air System and Brakes Air Tank (Secondary and Parking Brake)
HF181, HF201 and HF221 Felling Heads Plate Locations and Film Locations
776D, 777D and 777D HAA Off-Highway Truck/Tractors Air System and Brakes Air Tank (Service Brake and Retarder)
776D, 777D and 777D HAA Off-Highway Truck/Tractors Air System and Brakes Air Dryer (Brake System)
420D and 430D Backhoe Loaders Rated Load
2000/07/03 Correction to the Disassembly and Assembly Manual for the Removal and Installation of the Front Wheel Spindles {4234, 4234}
PF-300B and PS-300B Pneumatic Compactors Propel System Transmission Hydraulic System
950F Wheel Loader and 950F Series II Wheel Loader Hydraulic System Hydraulic Tank and Filter
D400E Series II Articulated Truck Steering, Suspension, and Ejector Body Hydraulic Systems Ejector Cylinder - Test
C15 and C18 Petrolem Generator Set Engines System Overview
2001/01/08 Correction to the Service Magazine , "A New Film (Window Sun Screen) is Available" {7340}
Alternator - Delco 21SI Stator - Test
Alternator - Delco 21SI Residual Magnetism - Restore
HF181, HF201 and HF221 Felling Heads for Track Feller Bunchers Felling Head
JF Series Starting Motor Brush and Brush Holder - Check
2000/07/24 Special Instruction, REHS0142-04 for Backhoe Loader Pin Bores is Now Updated {6101, 6104, 6503, 6506, 6508, 6515, 6518, 6533, 7054, 7222}
776D and 777D Off-Highway Truck/Tractors Electronic Systems Guide Brake Electronic Control System
JF Series Starting Motor No Load - Test
561N, 572R Series II and 572R Pipelayers and D10R, D11R, D5M, D5N, D6M, D6N, D6R, D6R Series II, D7R, D7R Series II and D8R Series II Track-Type Tractors Power Train Electronic Control System MID 113 - CID 0248 - FMI 09
HF181, HF201 and HF221 Felling Heads for Track Feller Bunchers Disc Saw
HF181, HF201 and HF221 Felling Heads for Track Feller Bunchers Saw Tooth
2000/07/10 Dimensions for Pin Bores in Special Instruction, REHS0276 are Now Updated {3260, 3269, 6116, 6118, 6119, 6125, 6126, 6127, 7057, 7069, 7100}
HF181, HF201 and HF221 Felling Heads for Track Feller Bunchers Operating Technique Information
776D, 777D and 777D HAA Off-Highway Truck/Tractors Air System and Brakes Air System