Caterpillar Approved Work Tools and Work Tool Attachments
Only use Caterpillar approved work tools and work tool attachments on this machine.
The following Caterpillar work tools and work tool attachments are approved for roading:
Show/hide table
| Caterpillar work tool | Germany | Italy |
|---|---|---|
| General Purpose Bucket - All | Yes | Yes |
| Light Material Bucket - |
Yes | Yes |
| Light Material Bucket - |
Yes | No |
| Dirt Bucket - |
Yes | Yes |
| Dirt Bucket - |
Yes | No |
| Multipurpose Bucket - |
Yes | Yes |
| Multipurpose Bucket - |
Yes | No |
| Utility Bucket - All | Yes | Yes |
| Pickup Broom BP15 and BP15B (at Full Rack) | No | Yes |
| Pickup Broom BP18 and BP18B (at Full Rack) | No | No |
| Pickup Broom BP15 and BP15B (at Half Rack) | Yes | No |
| Pickup Broom BP18 and BP18B (at Half Rack) | No | No |
| Landscape Rake - All (at Full Rack) | No | Yes |
| Landscape Rake - All (at Half Rack) | Yes | No |
| Industrial Grapple Bucket - All | Yes | Yes |
| Angle Blade - All | Yes | Yes |
| Vibratory Compactor - All | Yes | Yes |
| Cold Planer - All | Yes | Yes |
Contact your Caterpillar dealer concerning specific work tools and work tool attachments that are approved by Caterpillar for this machine. This list was completed at the time of publication. There may be additional work tools and work tool attachments that have been approved since that time. Consult your Caterpillar dealer for an updated list of approved work tools and work tool attachments.
Show/hide table
| Skid Steer Loader | |||
| Description | Part Number | Quantity | Location |
| Mirror | 132-5166 | 2 | Sides of the Machine |
| Lamps | 9W-3324 | 1 | Headlight |
| 100-3246 | 1 | Front Position Lights | |
| 5G-3244 | 1 | Front Directional Turn Signal | |
| 084-4347 | 1 | Rear Position Lights | |
| 084-4348 | 1 | Rear Directional Turn Signal | |
| Lock Pin | 178-2247 | 1 | Coupler |
| 9R-5301 | 1 | ||
| Block | 175-4237 | 1 | Lift Arm |
| Beacon | 142-8653 | 1 | Top of Cab |
| Guard for the Bucket | 177-9152 | 1 | Bucket |
| Guard for the Angle Blade | 165-8487 | 2 | Angle Blade |
| Articulation Lock for the Angle Blade | 165-8486 | 1 | Angle Blade |
| Front Skid Pad Guard for the Cold Planer (PC6 and PC9) | 178-3642 | 2 | Cold Planer |
| Side Shift Lock for the Cold Planer (PC6 and PC9) | 185-6341 | 1 | Cold Planer |
| Pivot Lock for the Cold Planer (PC6 and PC9) | 8T-4141
8T-4131 8T-4123 |
1 | Cold Planer |
| Corner Guard for the Pickup Broom | 184-4398 | 2 | Pickup Broom |
| Decal 100 mm X 350 mm | 177-7414 | 2 | Guard for Bucket
Cold Planer Guard Landscape Rake Vibratory Compactor |
| Decal 150 mm x 150 mm | 177-7437 | 2 | Vibratory Compactor |
| Decal 200 mm x 200 mm | 177-7415 | 2 | Guard for Bucket
Landscape Rake |
| 4 | Angle BladeGuard
Pickup Broom |
||
| Covers for the work lights | 186-2360 | 4 | Work Lights |
Contact your Caterpillar dealer concerning specific roading attachments that are approved by Caterpillar for this machine. This list was completed at the time of publication. There may be additional attachments that have been approved since that time. Consult your Caterpillar dealer for an updated list of approved roading attachments.
Caterpillar Information System:
Medium Wheel Loaders (MWL) Payload Control System (PCS) 3.0 Wiring Harness (Short Circuit) - Test
2000/06/26 Acknowledgment Time Explained for the VIMSpc99 Event Report {7601}
PF-300B and PS-300B Pneumatic Compactors Propel System Final Drive Reducer
24H Motor Grader Blade Tip Pin - Lubricate
Payload Control System (PCS) 2.X Wiring Harness (Open Circuit) - Test
2001/02/12 Replacement Shaft Assemblies for Countershaft Transmissions {3150}
776D, 777D and 777D HAA Off-Highway Truck/Tractors Suspension Cylinder Suspension Cylinder (Front) - Type 1
988G Wheel Loader Power Train MID 081 - CID 1406 - FMI 13
988G Wheel Loader Power Train MID 081 - CID 1406 - FMI 06
988G Wheel Loader Power Train MID 081 - CID 1406 - FMI 05
2000/06/19 New Fuel Level Sender Improves Reliability {1273}
SR4 and SR4B Electric Power Generation Rewind Data Winding Data for <B>7W-1877</B> Generator through <B>7W-8825</B> Generator
776D, 777D and 777D HAA Off-Highway Truck/Tractors Suspension Cylinder Suspension Cylinder (Rear)
2000/06/19 A New Drive Belt for the Air Conditioner is now Available {1357}
980G Wheel Loader, 824G Wheel Dozer, 825G Soil Compactor and 826G Landfill Compactor Implement Electronic Control System MID 082 - CID 0485 - FMI 05
980G Wheel Loader, 824G Wheel Dozer, 825G Soil Compactor and 826G Landfill Compactor Implement Electronic Control System MID 082 - CID 0485 - FMI 06
37-MT, 41-MT, and 42-MT Series Starting Motors Starting Motor
PF-300B and PS-300B Pneumatic Compactors Propel System Speed Module
988G Wheel Loader Power Train Backup Alarm Always On
8-16B, 10-20B and 10-20WB Extend-A-Mat<COMP-BREAK TAGNAME=cp850>©<COMP-RESUME> Screed Screed Cleanup
2000/06/19 Window Glass Templates Are Now Available {7310}
988G Wheel Loader Power Train Backup Alarm Always Off
992G Wheel Loader and 854G Wheel Dozer Power Train Starting System
TH103 Telehandler Parking