Boom Cylinder Pin - Lubricate
Show/hide table
| |
| Illustration 1 | g00713719 |
|
Lubrication Point for Two-Section Boom Cylinder Pin (Rear) | |
Show/hide table
| |
| Illustration 2 | g00710043 |
|
Lubrication Point for Three-Section Boom Cylinder Pin (Rear) | |
Show/hide table
| |
| Illustration 3 | g00710044 |
|
Lubrication Point for Boom Cylinder Pin (Front) | |
The boom cylinder pins are lubricated through fittings (1) and (2).
Fitting (1) for lubricating the rear cylinder pin is mounted remotely on the left side of the machine and the lubrication fitting is easily accessible.
Fitting (2) for lubricating the front cylinder pin is mounted on the eye of the cylinder rod. Raise the boom by approximately 10 degrees in order to gain access to the lubrication fitting for the front cylinder pin.
Caterpillar Information System:
TH62, TH63, TH82 and TH83 Telehandlers Gauges
TH62, TH63, TH82 and TH83 Telehandlers Bearing (Pivot) for Axle Drive Shaft - Lubricate
TH62, TH63, TH82 and TH83 Telehandlers Indicators
CS-531D, CP-533D and CS-533D Vibratory Compactors Propel System Wheel Drive Gearbox
3508B and 3512B Engine Supplement for 776D, 777D, and 777D HAA Tractor/Off-Highway Trucks Aftercooler - Remove
2000/05/22 Be Sure To Use The Correct Power Take Off Shaft With The Cage Assembly {1165}
3508B and 3512B Engine Supplement for 776D, 777D, and 777D HAA Tractor/Off-Highway Trucks Air Cleaner - Remove and Install
3508B and 3512B Engine Supplement for 776D, 777D, and 777D HAA Tractor/Off-Highway Trucks Oil Cooler (Hoist, Torque Converter, and Brake) - Install
824H Wheel Dozer, 825H Soil Compactor and 826H Landfill Compactor Power Train Using Caterpillar Monitoring System to Determine Diagnostic Codes
24H Motor Grader Safety Messages
24H Motor Grader Blade Lift Cylinder Socket - Lubricate
D7R Series II Track-Type Tractor Transmission System Oil Level - Check
TH62, TH63, TH82 and TH83 Telehandlers Longitudinal Stability Indicator
D400E Series II Ejector Truck Torque Converter, Transmission, and Transfer Gear Oil Level - Check
527 Track-Type Skidder Power Shift Transmission Parking Brake - Test and Adjust - Control Linkage
TH62, TH63, TH82 and TH83 Telehandlers Boom Telescoping Cylinder Air - Purge
CS-531D, CP-533D and CS-533D Vibratory Compactors Fuel System Secondary Filter - Replace
D400E Series II Ejector Truck Wheel Bearings - Check/Adjust
CS-531D, CP-533D and CS-533D Vibratory Compactors Propel System Final Drive Planetary
TH62, TH63, TH82 and TH83 Telehandlers Boom Pivot Shaft - Lubricate
2000/05/29 Tamper Proof Set Screws Are Used on Some 3054 Machine Engines {1251}
24H Motor Grader Transmission and Differential Oil Level - Check
TH62, TH63, TH82 and TH83 Telehandlers Light Switches
980G Wheel Loader, 824G Wheel Dozer, 825G Soil Compactor and 826G Landfill Compactor Implement Electronic Control System Electronic Control Module (Implement)