These gauges are used to help the operator to monitor trends in machine operation or changes in machine operation.
Show/hide table
|
|
|
Illustration 1 | g00710042 |
Show/hide table
|
Fuel Level (1) - This gauge indicates the amount of fuel that is left in the fuel tank. When the needle on the fuel gauge reaches the yellow area, fill the fuel tank.
|
Show/hide table
|
Engine Coolant Temperature (2) - This gauge indicates the temperature of the engine coolant. The white zone indicates that the engine coolant temperature is normal. The red zone indicates that the engine coolant is overheating. If the gauge indicates overheating, stop the engine. Investigate the cause. Check the coolant level. Check that the fan drive belt is not broken or loose. Check that the radiator fins are clean.
|
Show/hide table
|
Transmission Oil Temperature (3) - This gauge indicates the temperature of the transmission oil. The white zone indicates that the transmission oil temperature is normal. The red zone indicates that the transmission oil is overheating. In cold weather, time must be allowed for the oil to warm up. The system will not operate satisfactorily if the oil is too cold.
|
Show/hide table
|
Service Hour Meter (4) - This gauge indicates the total operating hours of the engine. The service hour meter should be used to determine the service hour maintenance intervals.
|