3176C and 3196 Engines for Caterpillar Built Machines Caterpillar


Engine Design

Usage:

140H 126



图 1g01424404

气缸和气门的位置

(A) 排气门

(B) 进气门

缸径 ... 125.0 mm (4.92 in)

冲程 ... 140.0 mm (5.51 in)

排量 ... 10.3 L (629 cu in)

气缸布置 ... 直列式

每气缸气门数 ... 4

注: 为检查发动机气门间隙的设定值,发动机必须是冷机且发动机必须停止。

发动机气门间隙设定

进气 ... 0.38 ± 0.08 mm (0.015 ± 0.003 in)
排气 ... 0.64 ± 0.08 mm (0.025 ± 0.003 in)

燃烧类型 ... 直喷式

点火顺序 ... 1、5、3、6、2、4

曲轴旋转方向是通过从发动机飞轮端观察来确定的。 旋转方向 ... 逆时针

注: 发动机的前端是指与发动机飞轮端相对的一端。 发动机左右侧是通过从发动机飞轮端观察来确定的。 1 号气缸是前气缸。

Caterpillar Information System:

D400E Series II Ejector Truck Steering, Suspension, and Ejector Body Hydraulic Systems Ejector, Steering, and Brake System Oil Contamination - Test
CS-431C, CP-433C and CS-433C Vibratory Compactors Propel System Hydraulic Tank
24H Motor Grader Parking Brake Control
2000/05/01 New High Strength Auger Shaft is Now Available {6631}
2000/05/01 New Shaft Assembly for the Bogies is Now Available {4151}
10-20B Extend-A-Mat<COMP-BREAK TAGNAME=cp850>©<COMP-RESUME> Screed Power Crown Control
2000/04/24 New Bearing Used in Transfer Gear Group {3159}
D400E Series II Ejector Truck Steering, Suspension, and Ejector Body Hydraulic Systems Ejector System Troubleshooting
D400E Series II Ejector Truck Steering, Suspension, and Ejector Body Hydraulic Systems Suspension System Troubleshooting
P16, P20, P25, P28, P40 and P60 Pulverizer Fire Prevention and Explosion Prevention
TK711, TK721, TK722 and TK732 Track Feller Bunchers Equipment Lowering with Engine Stopped
D400E Series II Articulated Truck Steering, Suspension, and Ejector Body Hydraulic Systems Steering System Troubleshooting
D400E Series II Ejector Truck Steering, Suspension, and Ejector Body Hydraulic Systems Pump Flow - Test
2000/05/29 Two Lubrication Pumps are Now Used on Feed Roller Arms {7516}
2000/05/01 Improved Design for Removing Broken Planetary Studs {4050, 4198, 4210}
10-20B Extend-A-Mat<COMP-BREAK TAGNAME=cp850>©<COMP-RESUME> Screed Gerotor Motor (Vibratory)
24H Motor Grader Fuel System Water Separator Element - Replace
24H Motor Grader Fuel System Secondary Filter - Replace
980G Wheel Loader, 824G Wheel Dozer, 825G Soil Compactor and 826G Landfill Compactor Implement Electronic Control System MID 082 - CID 0497 - FMI 03
CS-431C, CP-433C and CS-433C Vibratory Compactors Auxiliary Hydraulic System Hydraulic Tank
CS-431C, CP-433C and CS-433C Vibratory Compactors Auxiliary Hydraulic System Hydraulic Oil Filter
776D Wheeled Tractor and 777D and 777D HAA Off-Highway Trucks Power Train Final Drive - Install
D400E Series II Ejector Truck Steering, Suspension, and Ejector Body Hydraulic Systems Piston Pump (Steering) - Test and Adjust
980G Wheel Loader, 824G Wheel Dozer, 825G Soil Compactor and 826G Landfill Compactor Implement Electronic Control System MID 082 - CID 0497 - FMI 05
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.