Solenoid Valve (Centershift Lock) - Install
安装步骤
注: 安装之前先核实电磁阀（中心偏摆锁）的所有部件清洁无异物。
注: 检查所有部件和所有 O 形密封圈是否磨损或损坏。 必要时，更换部件。 在密封的地方，用润滑油将 O 形密封圈稍加润滑。
- 将 O 形型封圈 (12) 安装在托架组件 (11) 上。
Show/hide table
 | |
| 图 1 | g00635060 |
- 将支撑环 (13) 和 O 型密封圈 (16) 安装在托架组件 (11) 上。
- 将 O 型密封圈 (14) 和支撑环 (17) 安装在托架组件 (11) 上。
- 将 O 型密封圈 (15) 和支撑环 (18) 安装在托架组件 (11) 上。
- 将托架组件 (11) 安装在歧管 (2) 上。
Show/hide table
 | |
| 图 2 | g00635058 |
- 将电磁阀 (8) 安装在歧管 (2) 上。
Show/hide table
 | |
| 图 3 | g00635057 |
- 安装硬垫圈 (9) 和螺母 (10) ，将电磁阀 (8) 固定在歧管 (2) 上。
- 将歧管 (2) 安置在机器上。 安装螺栓 (3) 、垫圈和导线卡箍。
Show/hide table
 | |
| 图 4 | g00635056 |
- 将软管组件 (1) 连接在歧管 (2) 上。
- 将软管组件 (7) 连接在歧管 (2) 上。
- 将空气阀 (5) 安置在歧管 (2) 上。安装螺栓 (4) 和垫圈，将空气阀 (5) 固定在歧管 (2) 上。
- 连接电磁阀导线线束 (6) 。
Caterpillar Information System:
784C, 785C and 785C HAA Off-Highway Truck/Tractors Hydraulic System Bypass Switch (Hoist Screen)
980G Wheel Loader, 824G Wheel Dozer, 825G Soil Compactor and 826G Landfill Compactor Implement Electronic Control System MID 082 - CID 0354 - FMI 06
776D Wheeled Tractor and 777D and 777D HAA Off-Highway Trucks Power Train Gear Pump (Transmission Charging and Scavenge) - Assemble
CB-534C and CB-634C Vibratory Compactors Steering System Hydraulic Oil Contamination - Test
TH62, TH63, TH82 and TH83 Telehandlers Hydraulic System Machine Preparation for Troubleshooting
CB-535B Vibratory Compactor Rear Wheel Slide - Lubricate
3412E Engine for Caterpillar Built Machines Hydraulic System Warm-Up - Test
980G Wheel Loader, 824G Wheel Dozer, 825G Soil Compactor and 826G Landfill Compactor Implement Electronic Control System MID 082 - CID 0354 - FMI 05
776D Wheeled Tractor and 777D and 777D HAA Off-Highway Trucks Power Train Gear Pump (Transmission Charging and Scavenge) - Disassemble
950G Wheel Loader, 962G Wheel Loader and IT62G Integrated Toolcarrier Hydraulic System Gear Motor (Hydraulic Fan)
248 Skid Steer Loader Machine Systems Lift Arms - Remove
TH62, TH63, TH82 and TH83 Telehandlers Hydraulic System Telescoping Cylinder
2000/02/28 New Plates Improve Durability of the Coupler {6129}
Field Installation of the 169-0005 Auxiliary Lines Kits on the C-2 Series of the 426C and 436C Backhoe Loaders{5057} Field Installation of the 169-0005 Auxiliary Lines Kits on the C-2 Series of the 426C and 436C Backhoe Loaders{5057}
2000/06/05 Improvements To CAT ID {1920}
2000/04/17 Vertical Wheel Bearing Adjustment Procedures For Cast Wheels And Fabricated Wheels {4001, 4201}
2000/05/22 A New Housing for the Thermostat Is Now Available {1361}
2000/03/20 Parts Kits Improve Comfort and Productivity {1353, 3030, 4304, 4334, 5004, 5051, 5057, 5059, 5063, 5133, 7320}
CP-433C, CS-431C and CS-433C Paving Compactors Eccentric Weight Housing Oil - Change
836G Landfill Compactor and 834G Wheel Dozer Power Train Torque Converter (Lockup) - Assemble
3408E and 3412E Engines for Caterpillar Built Machines Vibration Damper and Pulley
2000/02/14 A New Guard is Used to Help Keep the Radiator Clean {7155}
Caterpillar<COMP-BREAK TAGNAME=cp850>©<COMP-RESUME> AP-900B and Barber-Greene<COMP-BREAK TAGNAME=cp850>©<COMP-RESUME> BG-240C Asphalt Pavers Vibratory System General Information
Caterpillar<COMP-BREAK TAGNAME=cp850>©<COMP-RESUME> AP-900B and Barber-Greene<COMP-BREAK TAGNAME=cp850>©<COMP-RESUME> BG-240C Asphalt Pavers Vibratory System Vibratory Hydraulic System