 | |
| Illustration 1 | g00649512 |
Inspect the seat belt for a worn condition. Also, inspect the seat belt for a frayed condition.
 | |
| Illustration 2 | g00649517 |
Inspect the seat belt for a damaged buckle. Replace the belt and the buckle if the belt and the buckle are worn. Replace the belt and the buckle if the belt and the buckle are damaged.
Inspect the seat belt mounting hardware on both sides of the seat. Replace any damaged hardware. Replace any worn hardware. Make sure that the bolts that secure the seat are tight.
Adjust the Seat Belt
The seat belt is equipped with a lock retractor that is automatic. The retractor will lock if the belt is pulled or the belt is jerked. The retractor will lock after the belt is pulled out of the retractor.
There is a comfort ride sleeve on the end of the seat belt buckle. This comfort ride sleeve will allow the operator to move by a limited amount.
Fasten the Seat Belt
Grasp the gripper. Pull the seat belt out of the retractor in a continuous motion.
Fasten the seat belt catch into the buckle. Make sure that the seat belt is placed across the lap of the operator.
The retractor will adjust the belt length. The retractor will lock in place. The comfort ride sleeve will allow the operator to move by a limited amount.
Release the Seat Belt
Push the release button on the buckle in order to release the seat belt. The seat belt will automatically retract into the retractor.
Seat Belt Extension
 |
When using retractable seat belts, do not use seat belt extensions, or personal injury or death can result. The retractor system may or may not lockup depending on the length of the extension and the size of the person. If the retractor does not lockup, the seat belt will not retain the person. |
 |
If you need to extend the seat belt, replace the retractable seat belt. Caterpillar recommends the use of a seat belt that is not retractable for a replacement part.
Seat belt extensions and longer seat belts are available from your Caterpillar dealer. Use one of these seat belts when the seat belt is too short for the operator.