Illustration 1 | g01044128 |
Cylinder stroke ... 426 mm (17 inch)
(1) Torque on the bolt ... 1600 ± 200 N·m (1180 ± 150 lb ft)
Replace a bolt that has been loosened or removed with a new bolt. Install the bolt with threads that are clean and free of lubricant.
(2) Diameter of the piston at the two lands on each side of the seal ... 88.4 ± 0.05 mm (3.480 ± 0.002 inch)
(3) 4M-5912 Spring
- Test force ... 19.3 ± 1.6 N (4.33 ± .35 lb)
- Test length ... 83.8 mm (3.30 inch)
- Free length after test ... 92.5 mm (3.64 inch)
- Outside diameter ... 9.53 mm (0.375 inch)
- Test length ... 83.8 mm (3.30 inch)
(4) Diameter of the rod ... 50.75 ± 0.038 mm (1.9980 ± 0.0015 inch)
(5) 6E-3772 Spring
- Test force ... 85.2 ± 3.0 N (19.15 ± 0.67 lb)
- Test length ... 28.25 mm (1.112 inch)
- Free length after test ... 33.09 mm (1.303 inch)
- Outside diameter ... 10 mm (0.39 inch)
- Test length ... 28.25 mm (1.112 inch)
(6) Bore in the cylinder ... 88.9 ± 0.08 mm (3.500 ± 0.003 inch)
(7) Bore in the head ... 51.13 ± 0.03 mm (2.013 ± 0.001 inch)
(8) Lubricate the sealing lip on each seal with clean hydraulic oil.
Apply 7M-7456 Bearing Mount Compound to the outer seal groove in the head prior to assembly.
(9) Torque on the head ... 600 ± 130 N·m (443 ± 96 lb ft)