Water Pump
Show/hide table
 | |
| 图 1 | g00292733 |
典型实例 叶轮盖在图中未显示。 | |
(1) 叶轮与壳体之间的间隙 ... 0.75 ± 0.25 mm (0.030 ± 0.010 in)
(2) 密封件
(3) 密封件高度 ... 12.83 ± 0.13 mm (0.505 ± 0.005 in)
(4) 滤清器不应伸出壳体表面。
(5) 皮带轮前端面到壳体端面的尺寸 ... 103.8 ± 0.3 mm (4.09 ± 0.01 in)
注: 在一些应用中，水泵的轴上压装有法兰。 皮带轮用螺栓固定至该法兰。
法兰前端面到壳体端面的距离为如下尺寸。 ... 92.4 ± 0.3 mm (3.64 ± 0.01 in)
Caterpillar Information System:
3304B and 3306B Engines for Caterpillar Built Machines Piston Cooling Jets - Remove and Install
3524B Engine for Caterpillar Built Machines Accessory Drive (Front) - Assemble
3304B and 3306B Engines for Caterpillar Built Machines Crankshaft - Remove
8-16B, 10-20B and 10-20WB Extend-A-Mat<COMP-BREAK TAGNAME=cp850>©<COMP-RESUME> Screed Feeder Control Sensor
3512B and 3516B Engines Engine Design
539 Knuckleboom Loader Hydraulic System Relief Valve (Delimber and Stabilizer Load Sensing) - Test and Adjust
797 Off-Highway Truck Fan Drive Hydraulic System Fan Drive Hydraulic System
CB-634C Vibratory Compactor Cooling System Coolant (DEAC) - Change
3524B Engine for Caterpillar Built Machines Accessory Drive (Front) - Disassemble
3408E and 3412E Engines for Caterpillar Built Machines Gear Group (Rear) - Install
938G Wheel Loader and IT38G Integrated Toolcarrier Implement Restraint (Roading)
Installation Instructions for Mounting Cab Visors onto Cab Windows{7301} Installation Instructions for Mounting Cab Visors onto Cab Windows{7301}
Challenger 65C, Challenger 65D, Challenger 65E, Challenger 70C, Challenger 75C, Challenger 75D, Challenger 75E, Challenger 85C, Challenger 85D, Challenger 85E and Challenger 95E Agricultural Tractors Machine Performance Panel Testing and Adjusting
3003, 3013, 3014 and 3024 Engines for Caterpillar Built Machines Glow Plugs - Remove and Install
3304B and 3306B Engines for Caterpillar Built Machines Engine Oil Pump - Install
CB-534C and CB-634C Vibratory Compactors Vibratory System Drum (Split)
797 Off-Highway Truck Engine Coupling Oil Filter - Replace
TH62, TH63, TH82 and TH83 Telehandlers Starting with Jump Start Cables
3114, 3116 and 3126 Industrial, Marine and Generator Set Engines Belt Tensioner
797 Off-Highway Truck Fan Drive Hydraulic System Piston Pump (Fan Drive) Pressure - Test and Adjust
D350E Series II Articulated Truck Power Train Differential and Bevel Gear (Center) - Remove
12H, 140H and 160H Motor Graders Power Train Wheel (Rear) - Remove and Install
D350E Series II Articulated Truck Power Train Differential and Bevel Gear (Center) - Install
320B, 320B L and 320B N Excavators Track Adjustment - Adjust