Fuel Priming Pump
Usage:
Remove Fuel Priming Pump
1. Remove two bolts (1), and remove fuel priming pump (2).
2. Inspect the gasket, and install a new gasket if needed.
Install Fuel Priming Pump
1. Make sure the gasket is in position for the fuel priming pump.
2. Put fuel priming pump (1) in position on the fuel filter base. Install the two bolts that hold it in place.
Caterpillar Information System:
3406C DIESEL TRUCK ENGINE Tachometer Drive
3406C DIESEL TRUCK ENGINE Electric Starting Motor
3406C DIESEL TRUCK ENGINE Fuel Injection Line Adapters
3406C DIESEL TRUCK ENGINE Fuel Injection Lines
3406C DIESEL TRUCK ENGINE Air Compressor
3406C DIESEL TRUCK ENGINE General Instructions (D & A)
3406C DIESEL TRUCK ENGINE Engine Vibration Troubleshooting
3406C DIESEL TRUCK ENGINE Fuel In Crankcase Oil
3406C DIESEL TRUCK ENGINE Loss Of Coolant
3406C DIESEL TRUCK ENGINE Cooling System
3406C DIESEL TRUCK ENGINE Engine Does Not Start
3406C DIESEL TRUCK ENGINE Hard Starting (Engine Crankshaft Turns Freely)
3406C DIESEL TRUCK ENGINE Fuel Filter And Base
3406C DIESEL TRUCK ENGINE Fuel Transfer Pump
3406C DIESEL TRUCK ENGINE Fuel Ratio Control
3406C DIESEL TRUCK ENGINE Automatic Timing Advance
3406C DIESEL TRUCK ENGINE Fuel Injection Pump Housing And Governor
3406C DIESEL TRUCK ENGINE Governor
3406C DIESEL TRUCK ENGINE Fuel Injection Pumps
3406C DIESEL TRUCK ENGINE Fuel Injection Pump Housing
3406C DIESEL TRUCK ENGINE Turbocharger (Earlier)
3406C DIESEL TRUCK ENGINE Turbocharger (Later)
3406C DIESEL TRUCK ENGINE Water Temperature Regulator And Manifold
3406C DIESEL TRUCK ENGINE Water Temperature Regulator (Ford)