Electric Starting Motor
Usage:
Remove Electric Starting Motor
1. Disconnect the wires from the starting motor.
2. Fasten a hoist to the starting motor. Remove three bolts (1) that hold the starting motor to flywheel housing. Remove the electric starting motor. The weight of the starting motor is 32 kg (70 lb).
Install Electric Starting Motor
1. Fasten a hoist, and install the electric starting motor on the flywheel housing. Install the three bolts that hold the starting motor to flywheel housing.
2. Connect the wires to the starting motor.
Caterpillar Information System:
3406C DIESEL TRUCK ENGINE Fuel Injection Line Adapters
3406C DIESEL TRUCK ENGINE Fuel Injection Lines
3406C DIESEL TRUCK ENGINE Air Compressor
3406C DIESEL TRUCK ENGINE General Instructions (D & A)
3406C DIESEL TRUCK ENGINE Engine Vibration Troubleshooting
3406C DIESEL TRUCK ENGINE Fuel In Crankcase Oil
3406C DIESEL TRUCK ENGINE Loss Of Coolant
3406C DIESEL TRUCK ENGINE Cooling System
3406C DIESEL TRUCK ENGINE Engine Does Not Start
3406C DIESEL TRUCK ENGINE Hard Starting (Engine Crankshaft Turns Freely)
3406C DIESEL TRUCK ENGINE Excessive White Or Blue Exhaust Smoke
3406C DIESEL TRUCK ENGINE Excessive Black Or Gray Exhaust Smoke
3406C DIESEL TRUCK ENGINE Tachometer Drive
3406C DIESEL TRUCK ENGINE Fuel Priming Pump
3406C DIESEL TRUCK ENGINE Fuel Filter And Base
3406C DIESEL TRUCK ENGINE Fuel Transfer Pump
3406C DIESEL TRUCK ENGINE Fuel Ratio Control
3406C DIESEL TRUCK ENGINE Automatic Timing Advance
3406C DIESEL TRUCK ENGINE Fuel Injection Pump Housing And Governor
3406C DIESEL TRUCK ENGINE Governor
3406C DIESEL TRUCK ENGINE Fuel Injection Pumps
3406C DIESEL TRUCK ENGINE Fuel Injection Pump Housing
3406C DIESEL TRUCK ENGINE Turbocharger (Earlier)
3406C DIESEL TRUCK ENGINE Turbocharger (Later)