Electric Drive Pump (Parking And Secondary Brake Release) - Disassemble
Start By:
- Remove the electric drive pump (parking and secondary brake release). Refer to Disassembly and Assembly, "Electric Drive Pump (Parking and Secondary Brake Release) - Remove".
- Position the electric drive pump on a suitable work bench, as shown.
- Remove four bolts (2) and the lock washers in order to remove pump assembly (3) from motor assembly (1).
Show/hide table
Illustration 2 g00530064 Show/hide tablePersonal injury can result from being struck by parts propelled by a released spring force.
Make sure to wear all necessary protective equipment.
Follow the recommended procedure and use all recommended tooling to release the spring force.
- Remove the following items from pump assembly (3): nut (8), gasket (7), screw (6), spring (5) and ball (4).
Show/hide table
Illustration 3 g00530065 - Remove six bolts (9) and cover (10) from motor assembly (1).
Show/hide table
Illustration 4 g00530066 - Remove gasket (11) and gasket (12) from cover (10).
- Remove coupling (13) from cover (10).
Show/hide table
Illustration 5 g00530068 - Remove six bolts (14) in order to remove cover (15) from motor assembly (1).
Show/hide table
Illustration 6 g00530072 - Remove gasket (16) from cover (15).
Note: Cleanliness is an important factor. Before the disassembly procedure, the exterior of the component should be thoroughly cleaned. This will help to prevent dirt from entering the internal mechanism.
Show/hide table
Illustration 1 | g00530061 |
Caterpillar Information System:
776D, 777D and 777D HAA Off-Highway Truck/Tractors Power Train Selector and Pressure Control Valve (Transmission) - Adjust
980G Wheel Loader Machine Systems Gear Pump (Secondary Steering) - Disassemble
5110B Excavator, 24H Motor Grader, 69D, 769D, 773D, 773E, 776D and 777D Off-Highway Truck/Tractors, 771D, 775D and 775E Quarry Trucks and AD40 Series II, AD45 and AE40 II Underground Articulated Trucks Caterpillar Monitoring System System Schematic
69D and 769D Off-Highway Trucks and 771D Quarry Truck Steering System Front Wheel Bearing - Adjust
69D and 769D Off-Highway Truck/Tractors and 771D Quarry Truck Power Train Transmission Hydraulic Control Pilot Pressure - Test and Adjust
554 Forwarder and 574 Forwarder Final Drive Oil Level - Check
3408E and 3412E Engines for Caterpillar Built Machines Fuel System
CB-534C and CB-634C Vibratory Compactors Propel System Propel System Troubleshooting
D250E Series II and D300E Series II Articulated Trucks Machine Systems Front Suspension Cylinder - Remove
773D Off-Highway Truck and 775D Quarry Truck Power Train Transmission Hydraulic Control Primary Clutch Pressure - Test and Adjust
69D and 769D Off-Highway Truck/Tractors and 771D Quarry Truck Power Train Transmission Hydraulic Control Primary Clutch Pressure - Test and Adjust
784C and 785C Off-Highway Trucks Machine Systems Slack Adjuster - Assemble
773D Off-Highway Truck and 775D Quarry Truck Steering System Front Wheel Bearing - Adjust
69D and 769D Off-Highway Truck/Tractors and 771D Quarry Truck Power Train Differential and Bevel Gear - Adjust
554 Forwarder and 574 Forwarder Fuel System Primary Filter (Water Separator) - Drain
793C and 793C XQ Off-Highway Truck Air System and Brakes Brake Hydraulic System
561M Pipelayer Torque Converter Scavenge Screen - Clean
Challenger 35, Challenger 45 and Challenger 55 Agricultural Tractors Electronic Monitoring Center
69D, 769D, 773D, 773E, 776D and 777D Off-Highway Trucks and 771D, 775D and 775E Quarry Trucks Power Train Electronic Control System Switches
69D and 769D Off-Highway Trucks and 771D Quarry Truck Steering System Front Wheel - Align
784C and 785C Off-Highway Trucks Machine Systems Electric Drive Pump (Parking and Secondary Brake Release) - Assemble
773D Off-Highway Truck and 775D Quarry Truck Engine Oil and Filter - Change
980G Wheel Loader Machine Systems Gear Pump (Secondary Steering) - Assemble
773D Off-Highway Truck and 775D Quarry Truck Fuel System Secondary Filter - Replace