554 Forwarder and 574 Forwarder Caterpillar


Final Drive Oil Level - Check

Usage:

554 1AM



Illustration 1g00873314

Each individual wheel on the machine has a final drive unit. Check the oil level in each of the final drives.




    Illustration 2g00873372

  1. Operate the machine for a few minutes. Park the machine so that the final drive filler plug is level with the centerline of the wheel.

  1. Remove the filler plug. The oil level should be at the bottom of the filler plug opening.

    If the oil level is higher than the filler plug, do not allow the oil to drain to the filler plug opening.

  1. Add oil, if necessary. Install the filler plug.

Caterpillar Information System:

3408E and 3412E Engines for Caterpillar Built Machines Fuel System
CB-534C and CB-634C Vibratory Compactors Propel System Propel System Troubleshooting
D250E Series II and D300E Series II Articulated Trucks Machine Systems Front Suspension Cylinder - Remove
773D Off-Highway Truck and 775D Quarry Truck Power Train Transmission Hydraulic Control Primary Clutch Pressure - Test and Adjust
69D and 769D Off-Highway Truck/Tractors and 771D Quarry Truck Power Train Transmission Hydraulic Control Primary Clutch Pressure - Test and Adjust
784C and 785C Off-Highway Trucks Machine Systems Slack Adjuster - Assemble
69D and 769D Off-Highway Trucks and 771D Quarry Truck Steering System Relief Valve (Secondary Steering Backup) - Test and Adjust
69D and 769D Off-Highway Trucks and 771D Quarry Truck Steering System Relief Valve (Secondary Steering Main) - Test and Adjust
784C and 785C Off-Highway Trucks Machine Systems Slack Adjuster - Disassemble
793C and 793C XQ Off-Highway Trucks Power Train Electronic Control Module (Power Train)
773D Off-Highway Truck and 775D Quarry Truck Cooling System Coolant (ELC) - Change
980G Wheel Loader Power Train Differential and Bevel Gear - Assemble
69D and 769D Off-Highway Truck/Tractors and 771D Quarry Truck Power Train Transmission Hydraulic Control Pilot Pressure - Test and Adjust
69D and 769D Off-Highway Trucks and 771D Quarry Truck Steering System Front Wheel Bearing - Adjust
5110B Excavator, 24H Motor Grader, 69D, 769D, 773D, 773E, 776D and 777D Off-Highway Truck/Tractors, 771D, 775D and 775E Quarry Trucks and AD40 Series II, AD45 and AE40 II Underground Articulated Trucks Caterpillar Monitoring System System Schematic
980G Wheel Loader Machine Systems Gear Pump (Secondary Steering) - Disassemble
776D, 777D and 777D HAA Off-Highway Truck/Tractors Power Train Selector and Pressure Control Valve (Transmission) - Adjust
784C and 785C Off-Highway Trucks Machine Systems Electric Drive Pump (Parking And Secondary Brake Release) - Disassemble
773D Off-Highway Truck and 775D Quarry Truck Steering System Front Wheel Bearing - Adjust
69D and 769D Off-Highway Truck/Tractors and 771D Quarry Truck Power Train Differential and Bevel Gear - Adjust
554 Forwarder and 574 Forwarder Fuel System Primary Filter (Water Separator) - Drain
793C and 793C XQ Off-Highway Truck Air System and Brakes Brake Hydraulic System
561M Pipelayer Torque Converter Scavenge Screen - Clean
Challenger 35, Challenger 45 and Challenger 55 Agricultural Tractors Electronic Monitoring Center
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.