Push Arm Pins
824G
Show/hide table
 | |
| Illustration 1 | g00525089 |
Show/hide table
 | |
| Illustration 2 | g00525111 |
Show/hide table
 | |
| Illustration 3 | g00525112 |
Show/hide table
 | |
| Illustration 4 | g00525113 |
(1) Torque for the four bolts ... 530 ± 70 N·m (400 ± 50 lb ft)
(2) Thickness of one new 7K-9221 Washer ... 1.24 ± 0.15 mm (.049 ± .006 inch)
Note: Install a minimum of one 7K-9221 Washer on each side of the connector. Install washers or remove washers in order to obtain a maximum clearance of 1.8 mm (.07 inch).
826G
Show/hide table
 | |
| Illustration 5 | g00650124 |
Washers (1) are used in order to center the blade. Install the washers as needed, in order to obtain 2 mm (0.0787 inch) of minimum clearance. The washers should be equally installed in order to center the blade.
Caterpillar Information System:
Comfort Series Seat For Caterpillar Machines Comfort Seat Air Suspension with Air Compressor
Contour Series Seat Mechanical Suspension
554 Forwarder and 574 Forwarder Engine Air Filter Primary Element - Clean/Replace
824G Wheel Dozer, 825G Soil Compactor and 826G Landfill Compactor Hydraulic System Push Arm
69D and 769D Off-Highway Truck/Tractors and 771D Quarry Truck Power Train Rear Axle and Final Drive System
Challenger 35, Challenger 45 and Challenger 55 Agricultural Tractors Implement, Steering and Brake Hydraulic Systems Steering Motor
D8R Track-Type Tractor Power Train Transmission - Assemble
D8R Track-Type Tractor Power Train Transmission - Disassemble
D8R Track-Type Tractor Power Train Transmission Hydraulic Control Valve - Assemble
D8R Track-Type Tractor Power Train Transmission Hydraulic Control Valve - Disassemble
784C and 785C Off-Highway Trucks Machine Systems Steering Accumulator - Assemble
784C and 785C Off-Highway Trucks Machine Systems Steering Accumulator - Disassemble
69D and 769D Off-Highway Truck/Tractors and 771D Quarry Truck Power Train Gear Pump (Power Train Charging) Pressure - Test and Adjust
784C and 785C Off-Highway Trucks Machine Systems Solenoid and Relief Valve (Steering) - Disassemble
554 Forwarder and 574 Forwarder Engine Air Precleaner - Clean - 574 Forwarder
554 Forwarder and 574 Forwarder Engine Crankcase Breather - Clean
561M Pipelayer Sampling Interval and Location of Sampling Valve
793C and 793C XQ Off-Highway Trucks Power Train General Information
D400E Series II Articulated Truck Power Train Solenoid Valve - Test
554 Forwarder and 574 Forwarder Engine Air Filter Secondary Element - Replace
824G Wheel Dozer, 825G Soil Compactor and 826G Landfill Compactor Hydraulic System Tilt Cylinder
69D and 769D Off-Highway Truck/Tractors and 771D Quarry Truck Power Train Torque Converter Lockup Clutch Supply Pressure - Test
561M Pipelayer Lubricant Viscosities
784C and 785C Off-Highway Trucks Machine Systems Accelerator Control - Remove and Install