Lift Control
Show/hide table
Illustration 1 | g00516984 |
Show/hide table
FLOAT (1) - Push the lever forward through the detent position. The blade will lower to the ground. The blade will float with the contour of the ground. The lever will remain in the FLOAT position until the lever is released from the detent. After the lever is released, the lever will return to the HOLD position. |
Show/hide table
LOWER (2) - Push the lever forward in order to lower the blade. The lever will return to the HOLD position when you release the lever. The blade will remain in the selected position. |
Show/hide table
HOLD (3) - The lever will return to the HOLD position when you release the lever from the RAISE position or from the LOWER position. The blade will remain in the selected position. |
Show/hide table
RAISE (4) - Pull back the lever in order to raise the blade. The lever will return to the HOLD position when you release the lever. The blade will remain in the selected position. |
Caterpillar Information System:
325B Excavator Machine Systems Swing Motor - Assemble
3114, 3116, and 3126 Industrial and Generator Set Engines Fuel System - Prime
3176C and 3196 Engines For Caterpillar Built Machines Crankshaft Main Bearings - Remove
793C Off-Highway Truck/Tractor Power Train Transmission, Rear Axle Housing, and Wheel Group - Remove
793C Off-Highway Truck/Tractor Power Train Traction Control System (TCS) Wheel Speed Ring - Remove and Install
69D, 769D , 773D, 773E, 776D, 777D, 784C, 785C, 785D, 789C, 789D, 793C and 793D Off-Highway Trucks and 771D, 775D and 775E Quarry Trucks Braking System Automatic Retarder Control (ARC)
583R Pipelayer Power Train Track Carrier Rollers
793C Off-Highway Truck/Tractor Power Train Drive Shaft Guard (Rear) - Remove and Install
793C Off-Highway Truck/Tractor Power Train Drive Shaft Guard (Front) - Remove and Install
793C Off-Highway Truck/Tractor Power Train Gear Pump (Torque Converter and Transmission) - Assemble
793C Off-Highway Truck/Tractor Power Train Gear Pump (Torque Converter and Transmission) - Disassemble
793C Off-Highway Truck/Tractor Power Train Gear Pump (Torque Converter and Transmission) - Remove
824G , 825G and 826G Landfill Compactor Tilt Control
3176C and 3196 Engines For Caterpillar Built Machines Crankshaft Main Bearings - Install
554 Forwarder and 574 Forwarder Engine and Machine Warm-Up
69D, 769D , 773D, 773E, 776D, 777D, 784C, 785C, 785D, 789C, 789D, 793C and 793D Off-Highway Trucks and 771D, 775D and 775E Quarry Trucks Braking System Traction Control System
527 Track-Type Skidder Power Train Power Train Hydraulic System
69D and 769D Off-Highway Trucks and 771D Quarry Truck Power Train Electronic Control Module (Power Train)
69D and 769D Off-Highway Truck and 771D Quarry Truck Air System and Brakes Front Wheel
IT14G Integrated Toolcarrier and 914G Wheel Loader Power Train Piston Motor (Hydrostatic)
574B Forwarder Operation Information
3406C Engines for Caterpillar Built Machines Engine Trunnion
CB-534C and CB-634C Vibratory Compactors Steering System Bypass Valve
527 Track-Type Skidder Power Train Equalizer Bar